Identificador: 172
Abierta
ID de articulo : # 1354 se ha agregado a su lista de deseos.
Descripción
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER JOINT
Features:
It performs cut off, burrs trimming, and moulding functions.
Two 4" D x 5" L max. tenon cutters, cope spindle accepts general shaper cutter. Suited for cutting tenons, finger joints for window or doorframe and general joint-tenon.
Hand, manual operated clamping and feeding of stock.
First the trim saw to cut off the end of stock evenly.
Then two moulding, tenon spindles are mounted at the rear of saw enable machine performs edge moulding.
Since each head is adjusted independently, a wide variety of tenon can be cut.
At the end the cope spindle provides 6000 RPM cutting which allows it to feature a spindle sharper function.
All operations can be accomplished in a single pass of feeding, high efficiency is assured.
Powerful industrial motor for maximun cutting capacity.
Precision sealed long-life bearing.
Heavy cast iron frames and table for durability usage.
|
SPECIFICATIONS |
|
2TA-SET-60 |
|
CAPACITY |
Max. Length of Cut |
~ |
|
Min. Length of Cut |
5" |
|
|
Max. Width of Cut |
17" |
|
|
Max. Clamping Thickness |
4" |
|
|
TRIM SAW |
Saw Blade Dia. |
8" ~ 10"x 1 |
|
Saw Arbor Dia. |
1" |
|
|
Saw Blade Speed |
4000 RPM |
|
|
Saw Head Tilt |
NO |
|
|
TENONER HEAD |
Spindle Shaft |
1" Dia. Taper x 4" L x 2 |
|
Spindle Speed |
4000 RPM |
|
|
COPE HEAD |
Spindle Speed |
3600 RPM |
|
Spindle Shaft |
1" Dia. x 4" L |
|
|
Spindle Tilt |
NO |
|
|
TRAVERSE |
Saw Longitudinal Travel |
3" |
|
Saw Vertical Travel |
3" |
|
|
Carriage Cross Travel |
20" |
|
|
MOTOR |
Saw & Tenoner Head |
3 HP x 1 |
|
Cope Head |
3 HP x 1 |
|
|
WEIGHT |
N.W. |
990 LBS |
|
|
G.W. |
1200 LBS |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2GB-GW-3300 - DISCO AFILADOR - 225 X 5 X 60 MM - ROSA - OXIDO - GRANO 60
PARTE: 2GB-GW-3300 - DISCO AFILADOR - 225 X 5 X 60 MM - ROSA - OXIDO - GRANO 60NUEVOColor rosa - para todo usoPara afiladoras Weinig Rondamat, etc. que afilan cuchillas para molduradoras, etc.
AMXmachinery
LINEA DE CARDADO OPEN END
PARTE:
12133 – LINEA DE CARDADO OPEN END
ACONDICIONAMIENTO, PREPARACIÓN, CARDA Y CONTINUACONTACTENOS PARA MAS INFORMACION Y FOTOS
AMXmachinery
PARTE: 2TA-DC7500 - CORTADORAS DE PERNOS - ¼” - ¾” - PARA HACER TAQUETES RAYADOS - ALTA VELOCIDAD
PARTE:
2TA-DC78 - CORTADORAS DE PERNOS - ¼” - ¾” -
PARA HACER TAQUETES RAYADOSNUEVA CON GARANTIAFeatures:High
production, high speed.Can
auto sift out dowel which length is insufficient.Each
spiral fluting, straight fluting, smooth and dowels with dowel cross-cut and
chamfering from DC-7500.Capacity:
about 7,500-15,000 dowels/hour with infinitely variable speed change.Cutting
length range: 30-150 mm.Accuracy
turbine and turbine shaft perform feeding transfer, lubrication for trans...
AMXmachinery
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVEN
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVENUsada - Muy buenas condicionesFeatures and Specifications:Saw capacity of 6" width x 8" vertical capacity. Minimum working 2” high X 12” long. Main drive motor to saw frame is 30HP 3PH, wired 460 VServo drive system to feed works is 1/4HP 3PHBlower to saw frame rack for added cleaning value is 3HP 3PHBody of frame saw is (2) sections allowing for fast access to the saw frameSaw blade speed is fixed at 550RPMDust extraction requires min 3000 CFM and...