ID: 2222
Open
Description
PARTE: 12506 – CENTRO DE MAQUINADO VERTICAL – CNC – HASS VF-6/50
USADO – BUENAS CONDICIONES
2015
HAAS VF-6/50 & HRT310
Type: Vertical Machining Centers
Category: Machining
Manufacturer: HAAS
Model: VF-6/50
Year: 2015
Description
HRT310 Rotary Table, 4th Axis Driving & Wiring, 8" Column Riser, Renishaw Probing, Through-Spindle Coolant, CAT50 Taper, only 1,500 Spindle Hours. This 2015 Haas VF-6/50 & HRT310 are in plant, under power and available immediately.
Specifications
TABLE LENGTH 64"
TABLE WIDTH 28"
X-AXIS TRAVEL 64"
Y-AXIS TRAVEL 32"
Z-AXIS TRAVEL 30"
SPINDLE SPEED 7,500 RPM
SPINDLE MOTOR 40 hp
SPINDLE TAPER CAT 50
TOOL CAPACITY (ATC) 30
ROTARY OR TRUNNION Yes
Equipped With
HAAS HRT310 4TH AXIS ROTARY TABLE
4TH AXIS DRIVE & WIRING
8” COLUMN RISER
RENISHAW WIRELESS INTUITIVE PROBING SYSTEM (WIPS)
PROBE RISER BLOCK
THROUGH-SPINDLE COOLANT (300 PSI)
SIDE-MOUNT TOOL CHANGER (30 ATC)
AUXILARY COOLANT FILTRATION SYSTEM
PROGRAMMABLE COOLANT
REMOTE JOG HANDLE
CHIP AUGER
EARLY POWER-FAULT DETECTION MODULE
COORDINATE ROTATION & SCALING
SPINDLE ORIENTATION
RIGID TAPPING
MACROS
USB PORT
** AS OF OCTOBER 2023, SPINDLE TIME – 1,571 HOURS
** MACHINE CUT PRIMARILY CAST IRON
** FULL REPLACEMENT COST, AS EQUIPPED - $225,000
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
GATO PARA TARIMAS 3 TONS - MB
PARTE # 1CM-PH-ST - PATIN HIDRAULICO ESTANDAR - 3 TONS - MBCaracterísticas:- Ancho horquillas: 27” (685mm)- Largo de horquillas: 48” (1200mm)- Ruedas: Tipo Tándem (Nylamid)- Capacidad: 3000 kgs (3 tons)- Procedencia: Americana Marca: NEWLIFT (USA)- Palanca: De posiciones- Peso patin: 90 Kg (aprox.)- Altura max: 203 mm (8”)- Altura min: 85 mm (3.3”)- Pintura: Esmalte Alta resistencia- Sistema Hidr: Partes intercambiables sin sellar- Garantía: 6 meses contra defectos de fabricación
AMXmachinery
PARTE: 12495 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 950
PARTE: 12495 - AFILADORA
DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 950
USADA – MUY BUENAS CONDICIONES
WEINIG RONDAMAT R-950
MFG: 1999
230V, 3 FASES, 60 HZ
PESO 1200
LBS1 FLECHA INCLUIDA
DE 1.5” DIAMETRO
Magnetic
on/off control
Cleaned,
checked
AMXmachinery
LIJADORA DE BANDA ANCHA – LIJAS INFERIORES – 1150 MM ANCHO - COSTA
PARTE:
12130 – LIJADORA DE BANDA ANCHA – LIJAS INFERIORES – 1150 MM ANCHO - COSTA
USADA – BUENAS CONDICIONES
working width 1150 mm.
roller roller brush
CE rules year 1996
volt. 380/50
KW 131
AMXmachinery
PARTE: 12559 - SIERRA MULTIPLE - TRIM SAW - NEWMAN KM16
PARTE:
12559 - SIERRA MULTIPLE - TRIM SAW - NEWMAN KM16
USADA – BUENAS CONDICIONESElectrical: 208-230/460v, 60hz, 3phSawblade Diameter: 18” approx.Max Cutting Thickness: 5” approx.Max Workpiece Length: 18ft approx.5-Head MachineEach head is equipped with dedicated 7.5hp motor.Each head is equipped with a dedicated chain deck feeders with guide dogs for squaring up and feeding wood to the saw heads.Equipped with (2) integrated 12” wide outfeed conveyors.