Identificador: 2626
Abierta
Descripción
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6
USADO – BUENAS CONDICIONES - RECONSTRUIDO
Max trim width 7.5"
Shear Cutting Action
Rotor Speed 500 to 3,600 RPM
Model 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution.
The open-rotor design facilitates free passage of air and material.
Shear-cut action for paper and tough, thin film and foil.
Total weight is 135 pounds
17"L x 13.25W x 22.5H
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MESA ESCUADRADORA DESLIZABLE
PARTE # SIL-DC-ST0408 - MESA ESCUADRADORA DESLIZABLE DE 4 PIES X 8 PIESCapacidad de corte longitudinal: 50” (1270 mm)Accesorio para Sierras DC-MBS250 Y DC-MBS300
AMXmachinery
SIERRA CIRCULAR 10" - ECONOMICA
PARTE: 1HR-63906 - SIERRA CIRCULAR 10" - ECONOMICA - 80T - ADMIRAL5/8 FLECHA, 7000 RPM - CARPINTERIA - CORTE FINO - DELGADOESPESOR: 0.099 PULGADASTERMINADO FINOACERO AL ALTO CARBON
AMXmachinery
PARTE: 2AR-34102 – ACCESORIO PARA UNIONES COLA DE MILANO
PARTE: 2AR-34102 – ACCESORIO PARA UNIONES COLA DE MILANO
NUEVA EN SU CAJA ORIGINALUse
your router to make strong, beautiful dovetail jointsCut
tails, pins, half-blind and standard dovetailsMale
and female dovetail cuts can be made in one passCam-lock
clamps quickly secure workpieceAccepts
stock up to 12 in. wide, 1-1/4 in. thickProduct
Height: 10-1/4 in.Product
Length: 15-3/4 in.Product
Width: 17 in.
Shipping
Weight: 17.40 lb.
AMXmachinery
T-EDGE APPLICATOR
PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050 T-Edge Applicator- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.- Standard Features:- Hammer ½ hp motor- Pneumatic corner notching- Electric cutoff ½ hp motor- 3" Dim. Saw blade 8,000 RPM- 80 PSI Required- Crated weight 600 LBS.- Shipping dimensions 53” long X 40” wide X 50” high