Identificador: 2642
Abierta
Descripción
PARTE: 12607 - SIERRA RAJADORA – 1 SIERRA - POWERMATIC
Usada – Buenas condiciones
Manufacturer Specifications
- Seven pressure rollers with dual anti-kickback pawls help prevent stock discharge
- 12" main blade is supported by heat-treated arbor for rigidity and support
- Large 18" rip and 3-7/8" depth of cut capacities for virtually any job
- Feed chain blocks are constructed of heat-treated cast iron with auto-oiler for accuracy
- Variable feed speeds accommodate different types of stock
- Auto-oiler with shut-off ensures long conveyor chain life
- Full cast iron construction for rock-solid operation
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
REASERRADORA 1 SIERRA 12"
PARTE # 2TA-BS-1212HR - REASERRADORA HORIZONTAL – 1 SIERRANUEVA CON GARANTIAMachine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.It is equipped with a digital controller for convenient and accurate thickness setting.The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.Variable feed spe...
AMXmachinery
PARTE: 1SL-DC-CH18F - TALADRO DE COLUMNA - MOTOR 1.2 HP - 110V, 1 FASE
PARTE:
1SL-DC-CH18F - TALADRO DE COLUMNA - MOTOR 1.2 HP - 110V, 1 FASENUEVO CON GARANTIAMOTOR: 1.2 HP, 110V, 60 Hz, 1 FASE12 VELOCIDADES: 340 - 2860 RPMCHUCK: 5 A 20 MM (3/4")DISTANCIA DEL CHUCK A COLUMNA: 175 MMCARRERA CHUCK: 85 MMDISTANCIA DEL CHUCK A LA MESA: 565 MMDISTANCIA DEL CHUCK A LA BASE: 1050 MMDIMENSIONES DE LA MESA: 285 X 285 MMDIMENSIONES TOTALES: 1140 MM X 500 MM X 300 MMPESO: 80 KGSEMPAQUE: 1 CAJA* INCLUYE PRENSA DE 4"
AMXmachinery
PARTE: 1SL-DC-TS12 - SIERRA DE MESA 12" - MOTOR 3 HP
PARTE:
1SL-DC-TS12 - SIERRA DE MESA 12" - MOTOR 3 HPMOTOR: 3 HP, 110/220V, 60 Hz, 1 FASESMEDIDAS DE LA MESA CON EXTENSION: 27" X 40-1/2"ALTURA MESA: 34-1/2"DIAMETRO DEL DISCO 12"DIAMETRO FLECHA 5/8"VELOCIDAD DEL DISCO: 4560 RPMRANGO ELEVACION DISCO: 0 A 4"RANGO INCLINACION DISCO: 0 A 45 GRADOSCAPACIDAD MAXIMA DE CORTE A 90 GRADOS: 4"CAPACIDAD MAXIMA DE CORTE A 45 GRADOS: 2-3/4"PESO: 127 KGS
AMXmachinery
PARTE: 12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
PARTE:
12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
USADO - EN BUENAS
CONDICIONESManufactured in 2015• 50.5 Total HP• Spring loaded conveyor pin system• Spiral insert knife cutterheads withtwo sided solid carbide knives• Digital electronic thicknessadjustment• 25” Wide x 8” thick capacity• Inverter variable feed speeds• Sectional chip breaker and feed rollerbefore top head• Removeable bottom head for knife change• Chain feed drive• Auto conveyor lubrication• New ...