ID: 2358
Open
.jpg)
Description
PARTE: 2QW-F15 - LIJADORA - AIRE COMPRIMIDO - CABEZA OPCIONAL 8”
Handy two-handed tool that is suitable for both wood sanding and finishing of impregnating and paints, as well as for polishing and cleaning, and is particularly suitable for manual machining of large surfaces such as furniture Assembled and stacked boards.
This product is hand tool only please remember to get the right grit 8" flap wheels for your job.
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
SIERRA CINTA – VOLANTES 40” – 15 HP - CON ALIMENTADOR – PEHAKA
PARTE: 12226 – SIERRA CINTA – VOLANTES 40” – 15 HP - CON
ALIMENTADOR – PEHAKA
USADA – MUY BUENAS CONDICIONES
saw wheel
diameter 1050 mm
cutting height
max. 450 mm
hydraulic tilt table
45°
infeed roll
driven by motor
infeed speed
2,5/5/7,5/15 m/min.
motor power 11 Kw
(15 HP)
table size 1100
mm x 1050 mm
cutting width
(distance between saw stand and sawblade) 1020 mm
diameter of the
connection for a dust suction pipe
overall size: L
22...
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14Used - Excellent conditions – Used for samples only2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPMSaw harbor
5/8"Dust exits 2 of
4" diameter, requres aprox. 850 CFMAir use 72 CFM at
65 PSI based in 15 cycles/minTable height
36-1/8" (917 mm) Pneumatic pedalEach cut takes 4 to
6 seconds
Weight 405 lbs (184 kg)
AMXmachinery
ASERRADERO
PARTE: 1CL-0550 - ASERRADERO ESTACIONARIO - 40" DIAMETRONuevo con garantiaAltura maxima de corte 100 CMSVolante de 40" diametro y ancho de 4" para cinta de 5" de anchoMotor de 20 HPProcesa aproximadamente 7,000 pies tabla por turnoAltura total 125"Largo de la cinta: 6.58 mtsPeso 750 kgsOPCIONALES- PARTE: 1CL-0501 - CARRO 2 ESCUADRAS PARA ASERRIO DE TROZO HASTA 10 PIES DE LARGO- PARTE: 1CL-0502 - CARRO 3 ESCUADRAS PARA ASERRIO DE TROZO HASTA 20 PIES DE LARGOVideo maquina funcionando: VIDEO 1
AMXmachinery
PARTE: 12305 - CABEZALES PARA MOLDURADORA - 1-13/16” FLECHA X 6” DIAMETRO X 2.25”, 3”, 4”, 5”, 6” LARGOS
PARTE: 12305 -
CABEZALES PARA MOLDURADORA - 1-13/16” FLECHA X 6” DIAMETRO X 2.25”, 3”, 4”, 5”,
6” LARGOS SIN BUJE - FLECHA 2-1/8"
USADOS - MUY BUENAS CONDICIONES
North American
Gladu hydro-lock
6 alas
20 grados
Diámetro interior - Flecha: 1-13/16"
Diámetro exterior: 6” (150 mm)
Largo 2-1/4” (57 mm)
Largo 3” (75 mm)
Largo 4” (102 mm)
Largo 5” (130 mm)
Largo
6” (152 mm)