ID: 1800
Open
Description
PARTE: 2CK-C14RS
Is a single-blade ripsaw is geared towards the shop looking to increase efficiency in their ripping operations but cannot justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the C14RS can produce a glue joint finish ready for panel glue-up right out of the saw.
- Produces a guaranteed glue joint finish to 15′, which eliminates the need to joint the material after ripping
- Precision straight line feeding for parallel and accurate rip cuts
- Eight hold down rollers over six rows ensure material is firmly held during cutting operations for a longer period resulting in a straighter, more precise cut
- Powerful 20HP saw motor for even the most demanding rip applications
- Maintenance-free chain track with the use of a reliable mechanical lubrication system
- Variable feed speed by frequency inverter for optimum cutting results
KEY ADVANTAGES
- Cast iron saw assembly, column, and table with superior vibration damping properties for optimum cutting results while ensuring long bearing and machine life.
- Very rigid machine body with a welded steel frame
- Absolute straight line feeding with glue joint to 15 ft.
- FC35 cast iron chain track with double-V design ensures precision straight-line ripping with a long wear life
- Precision Built Saw Arbor constructed of nickel-chrome steel, large diameter, accurately ground and dynamically balanced.
- Arbor runs in precision angular contact type ball bearings (eliminates any radial run-out & axial thrust) – V Belt driven from below.
- Mechanical operation chain oiler provides consistent lubrication to the chain track and automatically adjusts to your feed speed.
- When oil runs low, a warning light will come on, and when it gets too low, the machine track stops running to avoid damage to the track.
- Cast iron rip fence is mounted to a large diameter round guide rail with a quick-locking lever for effortless and accurate adjustment.
- 3 sets of anti-kickback fingers: 2 top and 1 set in the table for added operator safety.
- Soft start – Star Delta starter reduces the amp draw on startup.
- Optional laser light to project the cutting line to achieve maximum material yield.
|
|
INCH |
METRIC |
|
Saw blade diameter |
12″ ~ 15″ |
300 ~ 380mm |
|
Saw arbor diameter |
1.5″ |
|
|
Saw arbor speed |
3500 RPM |
|
|
Feed speeds variable |
33 ~ 98 FPM |
10 ~ 30 m/min |
|
Max. cutting thickness: 12″ blade |
3.35″ |
85mm |
|
Max. cutting thickness: 13″ blade |
3.94″ |
100mm |
|
Max. cutting thickness: 14″ blade |
4.33″ |
110mm |
|
Max. cutting thickness: 15″ blade |
4.92″ |
125mm |
|
Minimum work piece length |
8″ |
200mm |
|
Distance between saw and column |
24″ |
609mm |
|
Arbor motor |
20 HP |
|
|
Feed motor |
2 HP |
|
|
Table size |
50″ x 75″ |
1270 x 1905mm |
|
Table height |
31.5″ |
800mm |
|
Dust port size |
5″ |
125mm |
|
Net weight |
3410 lbs |
1550 kgs |
|
Machine dimensions |
89″ x 57″ x 57″ |
2269 x 1448x 1449mm |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
PARTE: 3AM-T-7040 - SIERRA CINTA PARA METAL - ALTA VELOCIDAD
PARTE: 3AM-T-7040 - SIERRA CINTA PARA METAL - ALTA VELOCIDADSaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorCore Selling Point: High-AccuracyBlade Speed(m/min): 27.45.80Vice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessHydraulic Motor(kw): 0.09Blade Tension: HydraulicCoolant Motor (kw): 1.5Main Motor(kw): 5.5Max. Cutting Capacity(mm): Round:400mm, sqaure:400*710MMBlade Size(mm): 1.1*41*5720
AMXmachinery1
PARTE: 3AM-G4028 - SIERRA CINTA PARA METAL
PARTE: 3AM-G4028 - SIERRA CINTA PARA METALMax. Cutting Diameter ： Round: 280 mmPlate: 190*400 mmBlade Speed： 25.46.79 m/minBlade Size： 0.9*27*3505 mmMotor Output： 2.2 kwHydraulic Pressure： 0.37 kwCoolant Pump： 0.04 kwTable height： 600 mmMachine Size(L*W*H) ： 1800*800*1230 mmNet Weight： 800 kgVice clamping ： HydraulicBlade tensioning form ： MaunalFeeding cut adjust way ： Hydraulic steplessFeeding way ： ManualHydraulic cooling way ： Natural Wind coolingChip conveyor wa...
AMXmachinery1
PARTE: 2CK-HR12E - REASERRADORA HORIZONTAL - 1 BANDA - 20 HP – 11.8” ANCHO X 4.92” ESPESOR
PARTE:
2CK-HR12E - REASERRADORA HORIZONTAL - 1 BANDA - 20 HP – 11.8” ANCHO X 4.92”
ESPESORNUEVA CON GARANTIA
2 OPCIONES: 230/1/60 - 460/3/60Can produce a cut up to 11.8” wide and 4.92” thick. Capable of handling material from 11.8” wide to 9.8” thick. The powerful 20HP motor makes easy work of even hard to cut wood material. The thin kerf 1” wide blade achieves optimum cut quality while maximizing material yield. The user-friendly controls and operation make will all...
AMXmachinery1
PARTE: 4NE-MAESTRO - CENTRO DE MAQUINADO CNC - 5 AXIS - MAESTRO
PARTE: 4NE-MAESTRO - CENTRO DE MAQUINADO CNC - 5 AXIS - MAESTROControl Unit: TPA Control UnitX AXIS - 1100 MMY AXIS - 1300 MM
Z AXIS - 700 MM• Y1/ Y2 Axis Motor: 1.5 kw Rack and Pinon• X Axis Motor: 1.5 kw Rack and Pinon• Z Axis Motor: 3 kw Ball Screw with break• Reductor: Liming FE Series• Spindle Motor: ML-1C 7.5/12 24 ER32 CROSS 2+2 ENDS• Vacuum System: Backer Vacuum 250 M^3• Oiling System: ILC Self Lubrication System• Machine Dimension: Length: mm * Width: mm * Height:...