Identificador: 2523
Abierta
.PNG)
.jpg)
Descripción
TALADRADORA 32 mm, 21 CABEZALES PARTE: 2CK-JB21P
Is designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precision boring head has interlocking steel gears with alternating spindles and accepts industry standard boring bits with 10mm shank. The convenient foot pedal initiates the drilling cycle so your hands can quickly adjust the workpiece to the next operation. The drilling unit moves up and down on high carbon anti-friction steel shafts with linear bearing for effortless movement.
- 21-spindles driven by powerful 2HP motor
- Pneumatic boring head stroke
- Convenient foot pedal control allows the operator to quickly adjust to the next drilling operation
- Boring head moves up and down on high carbon, anti-friction steel shafts with linear bearings
- 74 ¾” back fence with (2) flip stops and (2) depth adjustment stops for precise and fast setting
- 21-spindles driven by steel gears
- See through PVC guard to cover boring units for added safety
- Spring loaded part hold down
- Back fence & cross fence with scale position indicator
- (2) flip stops on back fence
- Precision mechanical digital readout for desired boring depth
- Precision slide bushing linear bearings for boring head stroke
Number of drilling spindles | 21 (10 LH & 11 RH) |
Motor | 2 HP |
Distance between spindles | 32mm |
Spindle chuck | 10mm |
Table size | 43 5/16″ x 15 ¾” |
Table height from floor | 33 3/8″ |
Max. depth of stroke | 3 3/8″ (85mm) |
Max. boring depth from edge | 8″ |
Back fence | 74 ¾” |
Back fence stops | 2 pcs |
Cross fence stops | 2 pcs |
Air requirement | 70 PSI |
Electrics | 230/1/60= 12 Full Load Amps |
Machine dimensions | 75″ x 30 ¾” x 58 ¼” |
Net weight | 375 lbs. |
Shipping dimensions | 43.3″ x 33″ x 69.3″ |
Shipping weight | 506 lbs |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA CINTA 24" - 3HP
SIERRA CINTA 24" - 3HP 2CK-HB600RIncorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can handle any job. With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements. The upper and lower blade guides provide maximum stability no matter the blade you are cutting with. This bandsaw delivers high accuracy for maximum production along with a simple design...
AMXmachinery1
PARTE: 2CK-HB-800 - REASERRADORA VERTICAL – CON ALIMENTADOR - VOLANTES 32”
PARTE:
2CK-HB-800 - REASERRADORA VERTICAL – CON ALIMENTADOR - VOLANTES 32”
NUEVA CON GARANTIAA 4” wide blade is driven by a powerful 20HP motor for precision straight resawing. Equipped with a 1HP power variable speed feed unit which is pneumatically actuated to provide consistent feeding of the workpiece. The feed speed can be variably adjusted from 3 to 56 FPM in accordance with the material type and thickness.Cast iron upper and lower saw wheels are precision machined and dynami...
AMXmachinery1
ENLAZADORA DE CAJONES AUTOMATICA
ENLAZADORA DE CAJONES AUTOMATICA 2CK-JDT75Display your quality and are built to last, producing beautifully aesthetic dovetails for drawer box production from a wide range of wood types, including plywood and solid wood. This fully automatic machine produces both the pin and tail of the dovetail simultaneously. All four sides of the drawer can be loaded into the machine for optimum production capacity.High-quality finish in both plywood and solid wood drawer box mater...
AMXmachinery1
LIJADORA DE BANDA ANCHA - MESA FIJA - 1 A 4 BANDAS
PARTE: 2CK-SUIncorporates a fixed table along with upper moving sanding units. This makes it ideal for in-line sanding or for use with conveyors as they do not need to be adjusted when changing material thickness. The digital thickness control will program the sanding units in accurately and precisely each time. The SU series is available with 1-4 sanding units and in widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, combination sanding units (...