Identificador: 2587
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
TORNO 26 X 120'' PARTE: 2GM-26120
- ISO 9001 certified
- Large spindle bore 4-1/8”
- Heavy Duty spindle D1-8
- Heavy Duty guideway width 16”
- Heavy Duty main motor 10HP
- 16 spindle speeds from 25-1,600 rpm, 16 speeds
- 54 kinds of inch threads, and 54 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
| Max. swing over bed | 26" |
| Max. length of workpiece | 120" |
| Max. swing over cross slide | 17 1/4" |
| Max. Swing in gap | 35 3/8" |
| Width of Bed | 16" |
| Effective length in gap to spindle | 9" |
| Effective length in gap to chuck jaws | 4 1/2" |
| Spindle bore | 4 1/8" D1-8 |
| Taper of spindle center | M.T. #5 |
| Spindle speeds | 25-1,600 rpm / 16 steps |
| Longitudinal feeds | 0.0016-0.055 IPR, 25 kinds |
| Cross feeds | 0.0008-0.027 IPR, 25 kinds |
| Inch threads | 80-7/16 TPI, 54 kinds |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ROUTER CNC
ROUTER CNCDesigned for highly sensitive components.Drilling from 6 sides: top, right, left, back, bottom, front• Horizontal magazine with belts• Capacity up to 14 pcs/min• Set-up help using light beam• One-man operatedExtra• Side movement• 45 degree drilling• Small millings• CNC milling and drilling end-processing• Can be integrated in a line of machines• Waste ConveyerLength:250 – 2200 mmHeight:10 – 40 mmWidth:25 – 300 mm
AMXmachinery1
FINGER JOINT AUTOMATICA CON MESA LARGA
FINGER JOINT AUTOMATICA CON MESA LARGA PARTE: 2CK-FL03-03Represents a state-of-the-art finger jointing production line, meticulously engineered to transform short and long wood scraps into valuable resources with exceptional cost-efficiency. This comprehensive jointing system elevates productivity to high speeds and offers user-friendly operation, allowing customers to optimize output and generate profits. With its groundbreaking technology, this solution delivers remarkable value in ...
AMXmachinery1
SIERRA MULTIPLE - 18 PULGADAS
PARTE: 2CK-MRS175FEATURESSpecially designed auxillary powered outfeed roller assures maximum smoothness of workpiece outfeed especially when working on extra thick, heavy and moist woodMassive cast iron base provides incredible absorption characteristics for high quality deep cutting operationsPrecision chain and rails (dip chain) system facilitates straight line cuttingEquipped with a blade mist cooling device providing cooling and cleaning for sawblades during cutting increasing blade life and...
AMXmachinery1
LIJADORA DE BANDA ANCHA - ARRIBA Y ABAJO
PARTE: 2CK-SU/SBIs designed for in-line or stand-alone operations. Suitable for double-sided processing solid wood or sealer sanding applications is built to exacting standards to sand multiple surfaces generally in one pass to achieve outstanding results with maximum efficiency. Is available with multiple configurations with 1-4 sanding units and widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, combination sanding units (drum/platen), or wire brush h...