Identificador: 395
Abierta
.png)
.JPG)
.JPG)
.JPG)
.JPG)
Descripción
PARTE # 2AM-410 - TROMPO/PULIDOR CON ALIMENTADOR INTEGRADO PARA MOLDURAS RECTAS Y CURVAS
Shaper Motor: 7.5 HP Belt Driven
Shaper Spindle Speed: 4000-7000 rpm
Shaper Spindle: 1-¼" Dia.
Sander Motors: 1.5 HP Direct Drive
Sander Spindle Speed: 400-1800 rpm
Sander Spindles: 1" Dia. by 4" Tall
Voltage: 208-240V 3ph, 30A
208-240V 1ph, 40A
440V 3ph, 15A
Conveyor: 6" Wide, 4 rows of tires
Vertical Adjustment: Yes, with digital counters
Horizontal Adjustment: Yes, with digital counters
Sanding Wheel Tilt: 60º Forward; 40º Back
Fence: 5 adjustable stops
Table Height: 36 inches
Size: 75" x 36" x 54"
Weight: 1325 lbs
Plantilla Centradora para curvas - opcional
Designed and manufactured to give years of dependable service, the Larick 410 will shape and sand a wide variety of workpieces. Features include a 6" wide feed chain with four staggered rows of hold down tires; front adjusting handwheels with digital readouts for horizontal and vertical shaper and sander positions; AC inverter controlled variable speed for shaper, sanders, and feed featuring digital readouts for speed and load; floating heads are optional which allow shaping and sanding of arched panels. The user friendly design makes setup and profile changeovers quick and easy.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA MULTIPLE – 12” ANCHO – SCM M3
PARTE:
12272 – SIERRA MULTIPLE – 12” ANCHO – SCM M3
USADA – BUENAS CONDICIONES
Arbor Space: 12"
Maximum Material Thickness: 3-1/2"
Throat Capacity: 6"
Main Motor: 60 HP, 3PH
Feed Motor 2.5HP
Variable Speed Feed from 30 - 150 FPM
Blade Bore: 70mm
Saw Blade Diameter: 8" - 14"
Top and Bottom Anti-Kickback Assemblies
Pneumatic Pressure Rolls
Infeed Rip Fence
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138 All Form 8' capacity- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)- Standard Features: - Overhead clamp and vacuum system- Forming length capacity 100"- 1 ½” maximum forming radius. (3” thick material)- Foot print 4' wide X 11' long- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit- Integrated timer. I...
AMXmachinery
ASTILLADOR DE MADERA – PORTATIL – MORBARK
PARTE: 12058 – ASTILLADOR DE MADERA – PORTATIL – MORBARKUSADO – EN BUENAS CONDICIONESMODELO 13 – 115 HP MOTOR JOHN DEERE DIESEL13” CAPACIDAD DIAMETROMANUFACTURA 1998
-500x500.jpg)
AMXmachinery
PARTE: 1AM-1150 – RESACADORA PARA TARIMAS – 4 CUCHILLAS – RESAQUE 9” LARGO - USO RUDO - INDUSTRIAL
PARTE: 1AM-1150 – RESACADORA PARA TARIMAS – 4
CUCHILLAS – RESAQUE 9” LARGO - USO RUDO - INDUSTRIALNueva con garantía – 6 meses
sobre defectos de fabricación en partes mecánicasMotor 10 HP, 220/440V, 3 fases, conectado
a 220V
Resaque máximo 9” largo x 2-1/2”
alto x 1-5/8” profundidad400 a 800 cortes/hr aprox.Largo de palos mínimo 30”, no
máximoCabezal con 4 cuchillas rectas de HSS acero de alta velocidadCabezal y Cuchillas de
Importación – La más Alta Calidad
...