Identificador: 94
Abierta
Descripción
PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138
All Form 8' capacity
- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz
- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)
- Standard Features:
- Overhead clamp and vacuum system
- Forming length capacity 100"
- 1 ½” maximum forming radius. (3” thick material)
- Foot print 4' wide X 11' long
- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit
- Integrated timer. Individual control on all air components.
- Working height 36"
- Crated weight 1855 LBS.
- Shipping dimensions 143” long X 46” wide X 57” high
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 4VF-CSA - CIZALLA - GULLOTINA - SIERRA CINTAS - ANCHOS 150, 200, 310 MM
PARTE: 4VF-CSA - CIZALLA -
GULLOTINA - SIERRA CINTAS - ANCHOS 150, 200, 310 MM
Nueva con garantía
150 MM
200 MM
310 MM
AMXmachinery
CABEZAL PARA MOLDURADORA – 40 X 122 X 100 MM
PARTE: 12109 - CABEZAL PARA MOLDURADORA – 40 MM FLECHA X 122 MM DIAMETRO X 100 MM LARGOUSADOS – EN BUENAS CONDICIONES20° ANGULO DE CORTEVARIOS EN EXISTENCIA
4,900.00 MXN
AMXmachinery
PROFILE KNIFE GRINDER - RONDAMAT 960
PARTE: 12306-E - PROFILE KNIFE GRINDER - RONDAMAT 960USED - GOOD CONDITION9-3/8″ max. arbor lengthTool dia. 11-3/4″ max. to 4″ minGrinding wheel speed inverter controlledGrinding wheel speeds from 1,500 to 3,000 RPM 1.5 HP motorhydro-clamping of grinding wheel to arborSetting gauges for axial constantAxial clearance angle 0-20 degreeOn board diamond wheel dressing8-7/8″ max. 6″ min. grinding wheel dia
13-gal. coolant tank w/ 1.2 HP pump
AMXmachinery
PARTE: AMX-10152 - EXTRACTOR DE TUBO - 12.5” DIAM INTERNO - 15” DIAM EXTERNO - ½ HP
PARTE: AMX-10152 - EXTRACTOR DE TUBO - 12.5” DIAM
INTERNO - 15” DIAM EXTERNO - ½ HP
USADO - MUY BUENAS CONDICIONES
MOTOR ½ HP, 200/230/460V, 3 FASES,
RPM 1140