Identificador: 115
Abierta
ID de articulo : # 125 se ha agregado a su lista de deseos.
Descripción
PARTE # SIL-DC-DC2041 - COLECTOR DE POLVOS 1 HP
NUEVO CON GARANTIA
MOTOR: 1 HP, 110V, 60 Hz, MONOFASICO
CAPACIDAD DE SUCCION: 500 CFM
NUMERO DE BOLSAS Y FILTROS: 1
PESO: 30 KGS
TIPO DE EMPAQUE: 1 CAJA
CAJA EMPAQUE MIDE: 76X45X46 CMS PESO 50 KGS APROXIMADAMENTE
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PEGADORA CANTO CHAPA - ESPESOR 0.35 - 1.5 mm
PARTE # 3NN-VENEERPLUSG1 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPASistema de pegamento integradoMachine SpecificationVeneer Strip Thickness (depending on veneer condition)：approx. 0.35 ~ 1.5 mmVeneer Strip Length：min. 350 mmVeneer Strip Width：min. 45 mmProduction Speed：up to 45 m/min.Electric Power：approx. 8.8 kwCompressed Air：5 barHeating Temperature：100 ~ 220 °CHeating Zone：1200 mmDimensions (L x W x H)：2200 x 2100 x 1600 mmNet Weight：approx. 1500 kgColor：RAL 8019 / R...
AMXmachinery
PARTE: 12492 - EXTRACTOR DE TURBINA - 3 HP
PARTE: 12492 - EXTRACTOR DE TURBINA - 3 HP
USADO - MUY BUENAS CONDICIONES
MOTOR: 3 HP (2.2 KW), 220/460V, 3
FASES
ENTRADA REDONDA: 10”
SALIDA RECTANGULAR: 4” X 6”
MEDIDAS TOTALES: 19” ANCHO X 18”
FONDO X 24” ALTOVideo: https://vimeo.com/870512842
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - COMPACT - CAP. 122” X 65” X 2-3/8”
PARTE: 2ST-COMPACT - SIERRA ESCUADRADORA
VERTICAL - COMPACT - CAP. 122” X 65” X 2-3/8”
NUEVA CON GARANTIA• 5’5” x 10’2” cut capacity; 2-3/8” (60mm) cut depth• 5-1/4hp, 3-ph high-efficiency motor w/ electro-mechanical brake• One-piece full-length centershelf with moveable aluminum fingers• Integral full-length wood support area for small part support• Specially designed measuring stop for use w small partsFlexible and EconomicalThe STRIEBIG COMPACT is the entry leve...
AMXmachinery
ESPIGADORA DOBLE
PARTE # 12005 – ESPIGADORA DOBLE MESA – PADE T45Limpiada y revisadaMaximum Tenon Length: 100mmMaximum Tenon Thickness: 30mmMaximum Tenon Depth: 50mmVertical Table Adjustment: 100mmTraversal Table Adjustment: 50mmTables TiltPneumatic Hold-DownsCutterhead Motor: 3 HPRevolution Motor: 1 HPMechanical Digital Readouts for Tenon AdjustmentsCurrently Wired for 460v, 3ph (Please Ask About Available Voltage Change to 230v, 3ph)