Identificador: 1370
Abierta
ID de articulo : # 1370 se ha agregado a su lista de deseos.
Descripción
CABEZALES PARA MOLDURADORA - NAVAJAS RECTAS
4 NAVAJAS – 12/20 GRADOS
Weinig, Wadkin, SCMI, IIDA, Leadermac, Woodmizer, Silver
Longitud de Corte, Diametro Flecha, Parte #
| 50mm (1.96") 40mm MH-122-4-50D |
| 1.5" MH-122-4-50D-1.5 |
| 60mm (2.36") 40mm MH-122-4-60D |
| 1.5" MH-122-4-60D-1.5 |
| 80mm (3.15") 40mm MH-122-4-80D |
| 1.5" MH-122-4-80D-1.5 |
| 100mm (3.94") 40mm MH-122-4-100D |
| 1.5" MH-122-4-100D-1.5 |
| 130mm (5.12") 40mm MH-122-4-130D |
| 1.5" MH-122-4-130D-1.5 |
| 150mm (5.91") 40mm MH-122-4-150D |
| 1.5" MH-122-4-150D-1.5 |
| 180mm (7.08") 40mm MH-122-4-180D |
| 1.5" MH-122-4-180D-1.5 |
| 230mm (9.05") 40mm MH-122-4-230D |
| 1.5" MH-122-4-230D-1.5 |
Shapers, Paulson, XL
Longitud de Corte, Diametro Flecha, Parte #
50mm (1.96") 1.25" MH-100-4-50D
60mm (2.36") 1.25" MH-100-4-60D
80mm (3.15") 1.25" MH-100-4-80D
100mm (3.94") 1.25" MH-100-4-100D
150mm (5.91") 1.25" MH-100-4-150D
Weinig, Wadkin, SCMI, IIDA, Leadermac, Woodmizer, Silver
Longitud de Corte, Diametro Flecha, Parte #
| 50mm (1.96") 1-13/16" MH-137-4-50D |
| 2-1/8" MH-137-4-50D-2.125 |
| 60mm (2.36") 1-13/16" MH-137-4-60D |
| 2-1/8" MH-137-4-60D-2.125 |
| 80mm (3.15") 1-13/16" MH-137-4-80D |
| 2-1/8" MH-137-4-80D-2.125 |
| 100mm (3.94") 1-13/16" MH-137-4-100D |
| 2-1/8" MH-137-4-100D-2.125 |
| 130mm (5.12") 1-13/16" MH-137-4-130D |
| 2-1/8" MH-137-4-130D-2.125 |
| 150mm (5.91") 1-13/16" MH-137-4-150D |
| 2-1/8" MH-137-4-150D-2.125 |
| 180mm (7.08") 1-13/16" MH-137-4-180D |
| 2-1/8" MH-137-4-180D-2.125 |
| 230mm (9.05") 1-13/16" MH-137-4-230D |
| 2-1/8" MH-137-4-230D-2.125 |
| 310mm (12.20") 1-13/16" MH-137-4-310D |
| 2-1/8" MH-137-4-310D-2.125 |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12553 - SIERRA TRONZADORA - 5 HP - GRUTTER
PARTE: 12553 - SIERRA TRONZADORA - 5 HP - GRUTTERUSADA
- BUENAS CONDICIONES
AMXmachinery
SIERRA RADIAL MANUAL
PARTE # 2EV-0700 - SIERRA RADIAL - MANUAL - EVANS 0700Miter Saw, Manual Feed- 220 Volt, 3 Ph, 3 HP- Standard Features:- 16" Saw blade 1" arbor- Set up for 90, 45, and 22 ½ degree cuts- Pneumatically operated Saw Guard- Double V belt Drive on arbor.- Swing out supports for longer lengths- 60" X 96" working surface- 4" dust outlet on back of dust hood- 35 1/2 " working height. Adjustable leveling feet.- 50" stroke- Crated weight 1540 LBS. Shipping dimensions 104" long X 90" wide X 68" high
AMXmachinery
PARTE: AMX-10121 - LIJADORAS DE CANTOS - 1 DERECHO Y 1 IZQUIERDO - TEKMAK
PARTE: AMX-10121 - LIJADORAS DE CANTOS - 1 DERECHO Y 1 IZQUIERDO
- TEKMAK
USADOS - BUENAS CONDICIONES
Revisados - Baleros nuevos
Motor ½ HP, 220/440V, 50/60 Hz, 3 fases, 1720 RPM
Medidas totales: 20” largo x 15” fondo c/u
Altura total minima: 17.5” c/u
Altura total máxima: 19.5” c/u
Rueda pulidora: 1.5” ancho x 8” diámetro c/u
Hecho en ItaliaEl banco donde estan puestos actualmente donde se tomaron las fotos no esta incluido
AMXmachinery
PARTE: 12565 - COLECTOR DE ASERRIN - MOTOR 10 HP - BELFAB
PARTE: 12565 - COLECTOR DE ASERRIN - MOTOR 10 HP -
BELFAB
USADO - MUY BUENAS CONDICIONES
Main Motor: 10
HP, 230/460v, 3ph
Start/Stop
Station for 230v, 3ph
Chip Collect in
Two Lower Plastic Bags
Filtration Surface (sq.ft): 331.63