Identificador: 142
Abierta
ID de articulo : # 142 se ha agregado a su lista de deseos.
PARTE: 2CA-WS-A2560 – LIJADORA DE BANDA ANCHA - 25” ANCHO - 1 LIJA
AMXmachinery
Descripción
PARTE: 2CA-WS-A2560 – LIJADORA DE BANDA ANCHA - 25” ANCHO - 1 LIJA
Cabezales: 1 cabezas
Capacidad: 25" ancho x 60" largo
- Rugged heavy-duty sheet metal construction design for durability usage.
- Full power industrial motors drive sanding and auto infeed smoothly.
- Infeed and outfeed are spring loaded hold down rollers to ensure positive feeding without sanding mark.
- Combination platen & drum sanding head for best sanding choice such as
- 1. With the platen up, the sander functions as a drum only machine, for sanding with a 40 ~ 100 grit belt.
- 2. With the platen and drum same level, intermediate and final finishing is possible, using a grit of 120 ~ 180.
- 3. With the platen down (below drum), used for the fine finishing or lacquer sealer sanding, with 180 ~ 600 grit.
- Sanding platen with a quick release and lock down designed for easy removal or loading of graphite platen.
- Computerized thickness adjustments control with accurate digital read out, just key in the size you are desired and automatic table movement for sanding thickness within 0.005? accuracy.
- Large size diameter contact drum is dynamically balanced rubber covered spiral grooves, design to provide considerable advantages for the effective removal of material.
- Special rubber feed belt for safe non-slipping, transporting the work pieces.
- The abrasive belts are tracked by oscillating cylinders linked to the upper roller. The edge of the belt is detected by electric eye sensor, which in turn control the air supply to the position via solenoid value. Also one limit switch it?s located on each and end top roller of the sander paper for quick stop in case of the event of belt breakage.
- Main table designed with the convenient leveling adjustment which assures greater stability with excellent tolerance they provide variable from 0? ~ 5? range sanding thickness.
Opciones: Cabezal de contacto de acero; Patin neumatico
| SPECIFICATIONS | ||||
| Max. Working Width | ||||
| Max. Working Thickness | ||||
| Min. Working Length | ||||
| Sanding Belt Dimensions (W x L) | ||||
| Digital Thickness Control | ||||
| Dust Collection Hood (Dia x Holes) | ||||
| Main Motor | ||||
| Feed Motor | ||||
| Table Raising / Lowering Motor | ||||
| Feed Speed (FPM) (Variable) | ||||
| Working Air Pressure | ||||
| Exhaust Volume Require | ||||
| N.W. | ||||
| G.W. |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LAMINADORA 62" RODILLOS SEGMENTADOS
PARTE # 2EV-0207 – PINCH ROLLER 62” - RODILLOS SEGMENTADOS – EVANS 020762" capacitySegmented bottom roller for countertop operationSafety Gates on In-Feed and Out-FeedSolid Top RollerSplit Bottom RollerFeed Rate: 50 FPMMaximum Width: 62”Maximum Thickness: 2”Work Height: 30-1/2”(Optional Riser Available)Drive Motor: ½ HPElectrical: 120 V, 1 PH, 60 HzAir Requirement: 100 PSIShipping dimensions 85” long X 33” wide X 57” high*Note: Options Listed under 0257 Pinch RollerOptions:- ...
AMXmachinery
BALEROS PARA MAQUINAS FINGER JOINTS, METAL, MADERA, ETC.
PARTE: 3TW-001- BALEROS PARA MAQUINAS
FINGER JOINTS, METAL, MADERA, ETC.
Baleros especiales para máquinas para metal, madera,
etc.
Envíenos las medidas y especificaciones que necesita.
AMXmachinery
BRIQUETEADORA 10 HP 25 HP
PARTE # 32GH-BP-1000B - BRIQUETEADORA - MOTOR 10 HPPARTE # 32GH-BP-2500B - BRIQUETEADORA - MOTOR 25 HPThe briquette presses are Strong, Robust and Compact.Delivered Fully assembled and ready for Immediate connection.Reliability and longevity associated with Hydraulic machine system.Produce high quality, evenly shaped briquettes in a unique closed end die system.Minimum friction is generated for low wear rates.P.L.C. (programmable logic controller) control hydraulic system which keeps all the hyd...
AMXmachinery
PARTE: 12561 - REASERRADORA - 2 BANDAS - MORGAN - CON REGRESADOR
PARTE: 12561
- REASERRADORA - 2 BANDAS - MORGAN - CON REGRESADOR
Usada - Buenas CondicionesReturn (needs new belt)460 V/3phEquipped with 6” wide infeed and outfeed belt conveyor (hydraulically driven).Equipped with (2) pneumatic hydraulicly driven hold down wheels.Max width cutting capacity: 6” approx.Push button controls. Dual Head design.Each head is powered by a dedicated motor.HP unknown(manufacturing plates are missing on both saw motors and hydraulic pump)Overall dimensions: 156...