Identificador: 1631
Abierta
ID de articulo : # 2137 se ha agregado a su lista de deseos.
Descripción
PARTE: 1AM - EXTRACTOR CENTRIFUGO - COCINA INDUSTRIAL
Extractor centrifugo para montaje en techo con salida vertical para campanas de cocina. Fabricado en aluminio, resistente a la intemperie soportando aire contaminado con grasa con turbinas de curvas atrasadas.
Extractor centrifugo para montaje en techo con salida vertical para campanas de cocina. Fabricado en aluminio, resistente a la intemperie soportando aire contaminado con grasa con turbinas de curvas atrasadas.
Características:
– Acoplamiento de motores desde 1/2 HP hasta 5 HP.
– Caudales en descarga libre desde 4,450 hasta 12,450 CFM.
Usos:
– Extracción de campanas de cocina con recolección de grasa.
– Capaz de soportar instalaciones largas de ductería.
|
Modelo
|
Potencia
HP |
Vol.max a 0.0”C.A.
PCM MC/HR |
|
|
CT-9 |
1/8 |
1,005 |
1,708 |
|
CT-12 |
1/4 |
1.500 |
2,548 |
|
CT-14 |
1/2 3/4 1 1 1/2 |
3,100 3,600 3,900 4,200 |
5,266 6,116 6,625 7,134 |
|
CT-18 |
1/2 3/4 1 1 1/2 2 |
4,200 4,950 5,450 6,325 6,700 |
7,135 8,410 9,259 10,746 11,383 |
|
CT-24 |
1/2 3/4 1 1 1/2 2 3 5 |
4,750 5,500 6,000 6,750 7,500 8,500 10,100 |
8,070 9,344 10,194 11,468 12,742 14,441 17,160 |
|
CT-30 |
3/4 1 1 1/2 2 3 5 |
6,500 7,250 8,400 9,200 10,500 12,500 |
11,043 12,317 14,271 15,630 17,839 21,237 |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
TROMPO AUTOMATICO - CON SISTEMA DE ALIMENTACION
PARTE: 2CK-DT-1128A
Range of cutter diameter
1” to 6” (changeable)
Table diameter
18”
Table speed
1.5 ~ 4.0 RPM (4 speeds)
Spindle diameter
30 mm
Spindle speed
9000 RPM
Cutter size
100 mm
Spindle height
4”
Follower roller diameter
100 mm x 1
Table drive moto...
AMXmachinery1
CEPILLO 2 CARAS - 30 PULGADAS
PARTE: 2CK-GT760ARDHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head.Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat...
AMXmachinery1
DOBLADORA DE METAL 5' X 12GA
DOBLADORA DE METAL 5' X 12GA PARTE: 2GM-0512EThis machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is po...
AMXmachinery1
CEPILLO 2 CARAS - CON TRANSMISION
PARTE: 2CK-GT610HIIs capable of speeds up to 98 feet per minute and its robust cast-iron body & industrial cardan drive system ensure high production planing day in and day out. The large diameter cutterheads are spiral type with two-sided solid carbide inserts which produce a clean finish with superior stock removal capacity. The spring loaded feed system passes the material over the bottom head allowing it to act like a jointer to flatten the board prior and then a sectional infeed roller fe...