ID: 172
Open
Description
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER JOINT
Features:
It performs cut off, burrs trimming, and moulding functions.
Two 4" D x 5" L max. tenon cutters, cope spindle accepts general shaper cutter. Suited for cutting tenons, finger joints for window or doorframe and general joint-tenon.
Hand, manual operated clamping and feeding of stock.
First the trim saw to cut off the end of stock evenly.
Then two moulding, tenon spindles are mounted at the rear of saw enable machine performs edge moulding.
Since each head is adjusted independently, a wide variety of tenon can be cut.
At the end the cope spindle provides 6000 RPM cutting which allows it to feature a spindle sharper function.
All operations can be accomplished in a single pass of feeding, high efficiency is assured.
Powerful industrial motor for maximun cutting capacity.
Precision sealed long-life bearing.
Heavy cast iron frames and table for durability usage.
|
SPECIFICATIONS |
|
2TA-SET-60 |
|
CAPACITY |
Max. Length of Cut |
~ |
|
Min. Length of Cut |
5" |
|
|
Max. Width of Cut |
17" |
|
|
Max. Clamping Thickness |
4" |
|
|
TRIM SAW |
Saw Blade Dia. |
8" ~ 10"x 1 |
|
Saw Arbor Dia. |
1" |
|
|
Saw Blade Speed |
4000 RPM |
|
|
Saw Head Tilt |
NO |
|
|
TENONER HEAD |
Spindle Shaft |
1" Dia. Taper x 4" L x 2 |
|
Spindle Speed |
4000 RPM |
|
|
COPE HEAD |
Spindle Speed |
3600 RPM |
|
Spindle Shaft |
1" Dia. x 4" L |
|
|
Spindle Tilt |
NO |
|
|
TRAVERSE |
Saw Longitudinal Travel |
3" |
|
Saw Vertical Travel |
3" |
|
|
Carriage Cross Travel |
20" |
|
|
MOTOR |
Saw & Tenoner Head |
3 HP x 1 |
|
Cope Head |
3 HP x 1 |
|
|
WEIGHT |
N.W. |
990 LBS |
|
|
G.W. |
1200 LBS |
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
PEGADORA DE SABANAS - FISHER RÜCKLE CROSSMASTER
PARTE
# 12160 – PEGADORA DE SABANAS - FISHER RÜCKLE CROSSMASTER
USADA – MUY BUENAS CONDICIONES
Year of manufacture 2008
Opening width mm 2.800
Veneer thickness min mm 0,3
Veneer thickness max mm 1,5
Strip width min mm 50
Strip width max mm 600
Feed rate max m/min 36
Cross splicing machine Yes
Edge gluing Yes
Trimming unit Yes
Rip cut Veneer clipper
Joint Only edge gluing
Controls and software:
SIEMENS SIMATIC PANEL
CE marking Yes
Total c...
AMXmachinery
ASTILLADORA – 30 HP – ABERTURA 60” X 60” APROX – SUDDRETH
PARTE: 12100 – ASTILLADORA – 30 HP – ABERTURA 60” X 60” APROX – SUDDRETHEn buenas condiciones30 HP Baldor rotor motor30" long rotor30" x 32" ram opening60'' x 60'' approx. hopper opening5 HP hydraulic ram motor1/2" screen openings, (needs repair)Weighs approx. 5,000 lbs
AMXmachinery
PLUMA ELECTRICA CON AGARRE DE VACIO Y BRAZO ROTATORIO
PARTE: 2EV-9265 - PLUMA ELECTRICA CON AGARRE DE VACIO Y BRAZO ROTATORIONuevo congarantía110 Volt, 1 Phase 60 hz5” casters on the front and 5” fixed wheels in back400 lb lift capacity8” suction cups on a mobile sledOn-board suction pump and accumulator tankAbility to flip panels over 180 degrees.Pivoting option below allows the panel to pivot horizontally on the arm for placement onto a lineOptions:- Pivoting 4 Cup Vacuum Hoist with Rotation Arm and 6' Reach (option 9245)
AMXmachinery
PARTE: 2PG-F-130 – HORNO PARA CERAMICA, VIDRIO, METALES – 25 LITROS
PARTE: 2PG-F-130 – HORNO PARA CERAMICA, VIDRIO, METALES – 25 LITROS
Nuevo con garantía
Temperatura Máxima: 926 grados centígrados
2400 watts, 20 Amps
Medidas interiores: 279 mm ancho x 279 mm fondo x 330 mm
alto You can make figurines up to 12” tall in the
F-130. Anneal large glass beads and marbles. Raise the spring-loaded
vertical-drop door to insert a glass figurine with a punty rod. Lower the door.
The punty rod will extend outside the firing chamber through the s...