Identificador: 1723
Abierta
ID de articulo : # 1723 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-JB21P
Is designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precision boring head has interlocking steel gears with alternating spindles and accepts industry standard boring bits with 10mm shank. The convenient foot pedal initiates the drilling cycle so your hands can quickly adjust the workpiece to the next operation. The drilling unit moves up and down on high carbon anti-friction steel shafts with linear bearing for effortless movement.
- 21-spindles driven by powerful 2HP motor
- Pneumatic boring head stroke
- Convenient foot pedal control allows the operator to quickly adjust to the next drilling operation
- Boring head moves up and down on high carbon, anti-friction steel shafts with linear bearings
- 74 ¾” back fence with (2) flip stops and (2) depth adjustment stops for precise and fast setting
- 21-spindles driven by steel gears
- See through PVC guard to cover boring units for added safety
- Spring loaded part hold down
- Back fence & cross fence with scale position indicator
- (2) flip stops on back fencePrecision mechanical digital readout for desired boring depth
- Precision slide bushing linear bearings for boring head stroke
|
Number of drilling spindles |
21 (10 LH & 11 RH) |
|
Motor |
2 HP |
|
Distance between spindles |
32mm |
|
Spindle chuck |
10mm |
|
Table size |
43 5/16″ x 15 ¾” |
|
Table height from floor |
33 3/8″ |
|
Max. depth of stroke |
3 3/8″ (85mm) |
|
Max. boring depth from edge |
8″ |
|
Back fence |
74 ¾” |
|
Back fence stops |
2 pcs |
|
Cross fence stops |
2 pcs |
|
Air requirement |
70 PSI |
|
Electrics |
230/1/60= 12 Full Load Amps |
|
Machine dimensions |
75″ x 30 ¾” x 58 ¼” |
|
Net weight |
375 lbs. |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CANTEADORA
CANTEADORA PARTE: 2CK-MX370PIs designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Versatile edgebander capable of applying 0.4mm to 3mm edge tape.Quick change glue pot allows you to change glue colours in minutes.Premilling ensu...
AMXmachinery1
ENGANCHADORA CON CONTROLADOR NC
ENGANCHADORA CON CONTROLADOR NC PARTE: 2GM-HBB-1010NCISO 9001 certified Meet OSHA and CE safety standard48” NC table back gauge with fingers Max. 16 bends per program Upto 100 Program Storage Programmable Angle/ Angle Correct NC ram height control for open hemming Hardened fingers and table Germany Rexroth hydraulic system Yaskawa Servo motors and Drives Schneider electrical components All steel construction for maximum rigidityHydraulic logic...
AMXmachinery1
ALIMENTADOR - 2048
PARTE: 2JG-STEFF-2048 - ALIMENTADOR 20484) Rollers and (8) speeds of 6-13-18-21-36-42-54-102 FPM0.7/1 HP motor4-3/4" roller diameter2-1/4" roller widthComplete with universal support columnWeight: 163 lbs.
AMXmachinery1
ROUTER CNC
ROUTER CNCDesigned for highly sensitive components.Drilling from 6 sides: top, right, left, back, bottom, front• Horizontal magazine with belts• Capacity up to 14 pcs/min• Set-up help using light beam• One-man operatedExtra• Side movement• 45 degree drilling• Small millings• CNC milling and drilling end-processing• Can be integrated in a line of machines• Waste ConveyerLength:250 – 2200 mmHeight:10 – 40 mmWidth:25 – 300 mm