Identificador: 1979
Abierta
ID de articulo : # 1979 se ha agregado a su lista de deseos.
Descripción
ROLADORA DE METAL
Is a heavy-duty, affordable, production tool for forming curved parts and tubes in 16-gauge and lighter sheet metal. The roll has three gear-driven rolls that ensure even starting and feeding of materials. The gearing features a 4:1 reduction ratio for ease of operation of heavy materials. All gears are fully enclosed for safety and protection from the elements. The roll drive is controlled by a toggle-action, shrouded foot switch for instant forward and reverse action. The drive motor is equipped with an electro-magnetic brake to prevent roll creep and over-forming.
Electrical and operator safety features include a full-length, front and back wire cable safety mechanism which instantly stops the rolls when tripped, two magnetic motor starters, fully enclosed electrical box with pilot light, insulated reinforced conduit for all wiring and fully enclosed drive train.
|
Maximum Forming Capacity, Mild Steel 16 gauge/1,6mm |
|
Maximum Forming Capacity, Stainless Steel 20 gauge/1,0mm |
|
Maximum Forming Length 49 in / 1244mm |
|
Minimum Forming Radius 1-1/2 in. / 38mm |
|
Wire grooves 3/8, ½, 5/8 in. / 9.5, 12.7, 15.8 mm |
|
Diameter of rolls 3 in. / 76mm |
|
Gear Ratio 4 : 1 |
|
Roll Speed 22 rpm |
|
Motor-230/460v, 3-phase, 60Hz ¾ hp |
|
Dimensions LxWxH 77 x 29x 50 in. |
|
Shipping Weight 1400 lbs / 635 kg |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
TROMPO - MOTOR 7.5 HP MESA INCLINABLE -5° A +45°
PARTE: 2CK-SS512TBIs a ruggedly built shaper with refined features well suited for demanding production environments. Its’ versatile design makes it the ideal shaping solution for edge-profiling, door & furniture components, mouldings, tenoning, and more. The powerful dual direction 7.5HP driven spindle allows for optimum shaping even with large profiles. The heavy-duty cast-iron table and shaping column ensure maximum stability with superior vibration damping for optimum finish quality....
AMXmachinery1
ASTILLADORA - 16 PULGADAS
PARTE: 2TA-WG-1620 - ASTILLADORA - 16 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage.Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of ...
AMXmachinery1
DOBLADORA DE METAL 4' X 1/4''
DOBLADORA DE METAL 4' X 1/4'' PARTE: 2GM-HBR-04254 foot plate rolls are made for bending and rolling 1/4" metal sheets or plates into cones and other cylindrical shapes. All three rolls are hydraulic driven, hardened, and made of high grade alloy steel. Equipped with a cone attachment, LED digital readout, operation pedal controls safety line, and a quiet hydraulic system.ISO 9001 certifiedTaiwan Machines All three rollers are drivenAll three rollers are ha...
AMXmachinery1
ALIMENTADOR - REASERRADORA
PARTE: 2CK-AF19NIs designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw ...