Identificador: 1990
Abierta
ID de articulo : # 1990 se ha agregado a su lista de deseos.
Descripción
PARTE: 12402 - ASTILLADOR 58” - PRECISION
Usado - Buenas Condiciones
6 navajas
Set up as a bottom discharge
(We can offer this chipper converted to top discharge).
Used 2 years since new
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12442 - PRENSA ARMADORA DE GABINETES - 98” X 55”
PARTE:
12442 - PRENSA ARMADORA DE GABINETES - 98” X 55”
Usada - En Buenas CondicionesEffective
Working Size: 98″ L x 55″ H x 27″ DeepMin.
Effective Working Size: 8″ L x 10″ HAutomatic/Manual
MotorizedAdjustment
of vertical and horizontal beams(2)
1.5 HP motorsJoy-stick
for manual movementClamp
timerCondition:
Cleaned/Checked
Electrical:
230V, 3PH
AMXmachinery
PARTE: 2EN-E2410 - COLECTOR ASERRIN - MOTOR 10 HP - 5,000 CFM
PARTE: 2EN-E2410 -
COLECTOR ASERRIN - MOTOR 10 HP - 5,000 CFM
NUEVO CON GARANTIA• Fan 10 HP• 5,000 CFM• Total Static Pressure 8"wg• Filter Bags/Area qty/SF 24/371• Discharge 2 Bags• Variable Frequency Drive (VFD) at 10 hp and 460V• Add Pressure Transducer Kit Recommended with VFD• Vibratory Cleaning Device (VCD) with 460 V momentary
starter, Aids in filter cleaning• Fan Inlet Adapter with 4" Branch and Manual Gate• Shop Vac Hose Kit 4" x 15' Flex Hose Recommended with
F...
AMXmachinery
CASETA PINTURA CONTINUA PARA MOLDURAS
PART # 2TA-TS-12ATSP – CASETA DE PINTURA CONTINUA PARA MOLDURASNueva con garantíaFeatures:PLC control for easy operator and variability setup.Fast spraying processing for profiles strips and two edges together or four edges at panels by one pass.The spray guns are controlled by photocell sensor for auto spray time and saving the spray material.Individual painting volume adjustment control for each spray gun.Variable feed speed control for the best finish result.Two trays to collect unused pai...
AMXmachinery
CUCHILLAS PARA MOLDURAS
CUCHILLAS PARA MOLDURAS PARA CEPILLO MOLDURADOR SIL-DC-WPM13Espesor 1/8”, ancho de 25mm y 35 mmPARTE #DESCRIPCIONDC-WPM13-1Clave 1 (longitud de corte 2-1/2”)DC-WPM13-2Clave 2 (longitud de corte 3” )DC-WPM13-3Clave 3 (longitud de corte 4-1/2”)DC-WPM13-4Clave 4 (longitud de corte 6”)