Identificador: 224
Abierta
ID de articulo : # 224 se ha agregado a su lista de deseos.
Descripción
PARTE # 2TA-SD-602T - LIJADORA DE MOLDURAS – 2 ARRIBA
PARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 1 LADO
PARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 2 LADOS
Nueva con garantia
Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with power spring-load pressure rolls at top, without sliding for irregual surface.
The brush, flap wheel, pneumatic drum or profile sanding head to cover all the profile sanding.
Top sanding head can be adjusted in & out, up & down.
Side sanding head can be adjusted tilt, forward & backward and up & down.
Variable feeding 20" to 80" to get different setup easily.
Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
SPECIFICATIONS |
|
Max. Sanding Width | 6" |
Max. Sanding Height | 4" |
Min. Sanding Length | 13" |
Wheel Head |
|
Brush Wheel Drive Motor | 2 HP |
Brush Tilts (universal Heads Only) | 90° ~ 180° |
Max. Sanding Wheel Dia. (Top & Bottom) | 12" |
Max. Sanding Wheel Dia. (Side) | 8" |
Sanding Spindle Dia (top & Bottom) | 1-1/4" |
Sanding Spindle Dia. (Side Head) | 1" |
Spindle Speed | 0 ~ 3600 RPM |
Profile Platen Belt Head |
|
Range of Workpiece Width | 2" ~ 70" |
Minimum Length of Workpiece | 4" |
Range of Workpiece Thickness | 1/6" ~ 4" |
Simple Belt Head |
|
Sanding Belt Size | 6" x 20" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MESA VERDE PARA TORNO DE 8 PIES
PARTE: 11725 - MESA VERDE PARA TORNO DE 8 PIES
6 - MESA VERDE PARA TORNO DE 8 PIES CON 3 CAMAS DE
BANDA Y GUILLOTINA A LA SALIDA MARCA PRETINCE
AMXmachinery
LIJADORA 15"
PARTE # 2TA-CA-1554 - LIJADORA - CALIBRADORA - 15" ANCHO- Combination head configuration drum and platen produces a finer finishing result.- Pneumatic controlled OSCILLATING BELT SYSTEM and easy adjustable pressure for sanding different wood materials such as veneer, hard wood and soft wood.- Conveyor table roller extension, ideal for big panel sanding such as doors, window frames, etc.- Specially designed for one side open body sanding up to 30 panels with two passer.- The emergency stop device...
AMXmachinery
ROUTER PIN INVERTIDO - CR ONSRUD 36210
PARTE: 12127 - ROUTER PIN INVERTIDO - CR ONSRUD 36210
USADO – EN BUENAS
CONDICIONES – LIMPIADO Y REVISADO
230V, 3 PH, 60 CY
10 HP motor, belt driven to spindle
25,000 RPM spindle speed
Pneumatic spindle and guide pin movement via foot
pedal
3" spindle travel
43" x 31" acrylic topped table
36" throat depth
3-Position adjustable depth stop, infinitely
adjustable
Maximum workpiece/template height is 4"
3/4" max. Chucking capacity
Magnetic starter with over...
AMXmachinery
COMPACTADORA DE CARTON – HORZONTAL – 15 HP
PARTE:
12354 – COMPACTADORA DE CARTON – HORZONTAL – 15 HP
USADO EN BUENAS CONDICIONESHas an
extra large feeder hopper that can be adapted to gravity, pneumatic or belt
conveyor automatic feed devices.Fully
automatic baling cycle with start-compress-and-stop action, requiring only a
part-time operator to tie-off bale and open ejector door. Bale automatically
gets ejected as new bale is being formed. Saves space and money.
440v , 3
phase, 60hz, 20 amp