Identificador: 2432
Abierta
ID de articulo : # 2432 se ha agregado a su lista de deseos.
Descripción
PARTE: 12563 - TORNO COPIADOR ASIMETRICO - GENNARI - 4 ESTACIONES
USADO - BUENAS CONDICIONES
MOTOR: 5.5 HP, 220/380V, 60 HZ, 3400 RPM
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTA
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTAUSADA – BUENAS CONDICONESFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead times durin...
AMXmachinery
SIERRA TRONZADORA 18" DERECHA / IZQUIERDA
PARTE # 2NT-NTCS18L – SIERRA TRONZADORA – DISCO 18” – MOTOR 10 HP – IZQUIERDA – LEFTPARTE # 2NT-NTCS18R – SIERRA TRONZADORA – DISCO 18” – MOTOR 10 HP – DERECHA – RIGHT - OPCIONALNueva con garantiaFEATURESMax cutting capacity: 2" x 12", 3" x 11", 4" x 10"10HP motor, 3PH 230V with 24V magnetic controls18” 120T Carbide tipped blade with included1” Saw arbor diameterCycle operation: PneumaticTable size: 26” x 27.5”Quick access on front of the machine to adjust blade s...
AMXmachinery
PARTE: 12474 - PINCH ROLLER - EVANS
PARTE: 12474 - PINCH
ROLLER - EVANS
USADA - BUENAS CONDICIONES
Safety Gates on In-Feed and Out-Feed
Solid Top and Bottom Rollers
Feed Rate: 50’ FPM
Maximum Width: 62”
Maximum Thickness: 2”
Thickness adjustable by spacers
Work Height: 30-1/2”
Drive Motor: 1/2 HP
Electrical: 120 V, 1 PH,
60 Hz
Air Requirement: 100 PSI
AMXmachinery
PARTE: 12131 – LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - TIMESAVERS
PARTE:
12131 – LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - TIMESAVERS
USADA – EN BUENAS CONDICIONES
3 lijas superiores y 3 lijas inferiores
Constant passline (38”
height).
This unit is ideal for sanding
heavy panels
Bottom Head first:
1st Head 60 HP 80/70 durometer
Contact Drum,
2nd head 50 HP 80/70 durometer
contact drum,
3rd head 40 HP Platen
96” long Conveyor between
machines driven by the top head machine
Top Head
1st Hea...