Identificador: 2458
Abierta
ID de articulo : # 2458 se ha agregado a su lista de deseos.
Descripción
PARTE: 12572 - PRENSA DE RADIO FRECUENCIA - OGDEN
USADA - BUENAS CONDICIONES
Curing area: 36” x 60” x 2” thick.
Clamping pressure is applied by multi-power (dual pistons on a common shaft) pneumatic cylinders to maximize pressure while relying on standard plant pressures. Unlike presses without multi-power cylinders, which require booster compressors, the Model SL36x60 reaches full capacity at 100-psi plant air pressure.
Edge pressure is applied by eight (8) each pusher shoes, each with a 4” bore x 4” stroke twin-piston multi-power pneumatic cylinders.
Top platen pressure is applied by two (2) 5” diameter x 16” stroke pneumatic cylinders through a cantilever arm that keeps the footprint to a minimum while still allowing the operator full access to the platen area.
The platen is set at a 45-degree angle and the top platen opens wide; allowing the operator to step inside the press for ergonomic and accurate parts placement.
The internal solid state RfsProtech 6KW Generator cures approximately 600 square inches of glue line per minute.
The Generator features solid state rectifiers and all aluminum cabinet for maximum conductivity and superior performance.
Two-hand no-tie-down safety controls for closing the top platen.
Controls are simple to understand, and are complete with the required push-buttons, switch, meters, digital operator display, and on-screen troubleshooting diagnostics.
The machine is controlled by a PLC for dependability and efficient maintenance. All controls will be provided for safe and efficient operation. The operator screen permits efficient operation, and the included press diagnostics screens assist in trouble-shooting when the need arises.
Proper interfaces will be provided for operational signals and emergency system stop.
All necessary RF controls, including buttons, meters, and PLC operator interface panel are mounted on a control panel attached to the left front of the press.
Interlocked top platen and safety switches on all access doors insure operator safety.
Power requirements are 480 volt, 60 cycle, 3 phase electric.
Circuit breaker protection is provided. A service disconnect is required for safety, but is not provided.
Powered In-Feed table with motor and controls
Out-feed steel deck
Voltage 480 volts 60 Hz
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TEMPLATE MAKER - AREA TRABAJO 8” x 12” - TEMPLATE MAKERS
PARTE: 12368 - TEMPLATE MAKER - AREA TRABAJO 8” x 12” - TEMPLATE
MAKERS
NUEVO - NUNCA USADOInformation from manufacturer:For making templates for grinding
moulder knives. it have never been out of the original packing, So basically
brand new without warranty Here is the web site to the company that the machine
was purchased from a few years ago
http://www.templatemakers.com/cnc_technology/ So you can grind the moulder
knives. fully loaded machine . All the bells and whistles. revers...
AMXmachinery
SIERRA MULTIPLE – 12” ANCHO – SCM M3
PARTE:
12272 – SIERRA MULTIPLE – 12” ANCHO – SCM M3
USADA – BUENAS CONDICIONES
Arbor Space: 12"
Maximum Material Thickness: 3-1/2"
Throat Capacity: 6"
Main Motor: 60 HP, 3PH
Feed Motor 2.5HP
Variable Speed Feed from 30 - 150 FPM
Blade Bore: 70mm
Saw Blade Diameter: 8" - 14"
Top and Bottom Anti-Kickback Assemblies
Pneumatic Pressure Rolls
Infeed Rip Fence
-500x500.jpg)
AMXmachinery
CUCHILLAS FINGER JOINT
CUCHILLAS PARA SISTEMA FINGER JOINTCuchillas de 2 alasMedidas: 160X4.0X50-2TMedidas: 160mm diametro exterior x 4mm espesor x 50mm diametro interiorPuntas de Carburo de Tusgteno2GB-FJ-00160-1 CUCHILLAS ENMEDIO - 2 ALAS2GB-FJ-00160-2 CUCHILLAS ESQUINAS - 2 ALAS
AMXmachinery
FILTROS STANDARD
Los filtros Standard y de Alta Eficiencia estan disenados para capturer cualquier solido mojado o particulas de liquid en una corriente de aire como son pegamentos, aceites, manchas, lacas, fibra de vidrio, epoxicos, selladores,teflon, etc.Los filtros cumplen con los requerimientos de la EPA y la capacidad de arresto de las Pinturas van desde 98.2% a 99.4% de eficiencia.FILTROS PARA CASETAS DE PINTURA 1 PIE = 30.48 CMS 1 PULGADA = 2.54 CMSFILTRO BLANCO - STANDARDAN-AF813Size: 3' x 30' ...