Identificador: 250
Abierta
ID de articulo : # 250 se ha agregado a su lista de deseos.
Descripción
PARTE # 12WG-UNIMAT 217 - MOLDURADORA - 5 CABEZALES
MOLDURADORA AUTOMATICA
5 CABEZALES
CARACTERISTICAS GENERALES:
KW (HP) rpm Tool cutting circle
1 - 7,5 (10) with Electronic Brake 6000 5“ – 5-11/16“
2 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“
3 - Joint Motor together with Right 6000 5“ – 7-7/8“
4 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“
5 - 7.5 (10) with Electronic Brake 6000 5“ – 7-7/8“
Tool arrangement BRLTB
Working width 3/4“ – 9“
Working height 5/16“ – 4-3/4“
(with tool cutting circle 5”)
Feed Speed-variable with inverter 20 – 100 feet per minute
DigiSet (double mechanical readouts) for left and top radial
adjustments. One readout is for the tool size and the other for the
finished wood dimension.
Five feed roller shafts in standard
One driven steel rollers in the machine table
One driven roller in the out-feed table
Axial setting range of feed roller opposite the left tool holder 1 3/8”.
Extended feed roller shaft opposite the left tool holder 6”.
Axial setting range of vertical spindle 3 -1/8 in.
Axial setting range of horizontal spindle 1 -3/4 in.
(1st bottom 3/16 in.)
All spindles diameter 1 - 1/2"
Mechanical readouts on top spindle chip-breaker and pressure shoe.
5 Additional set of spacing collars, clamping length 6-11/16”,
diameter 1-1/2"
Operating voltage- 3 phase, 460 Volt, 60 Cycles
according to US regulations
Straightening table, 6-1/2 ft
(incl. edge jointing fence)
Machine table and fences chromium-plated (excluding infeed table and special table plates)
Electric height adjustment of the feed
Central position of lubrication points at the front side of the machine
One interior light in the safety hood
The Illustrations in this offer can include special equipment, which do
not belong to the range of your offer.
The offer is made pursuant to our General Standard Terms and Conditions.
Safety and Noise Protection:
Electromagnetic interlocking of the safety hood (the hood may be
opened only after the spindles come to a complete stop,
(which is approximately 15 seconds with the “Smart” Spindle Brakes)
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
BRIQUETEADORA PARA MADERA– MOTOR 10 HP – WEIMA
PARTE: 12277 – BRIQUETEADORA PARA MADERA– MOTOR 10 HP –
WEIMA
USADA – BUENAS CONDICIONESHydraulicaly Controled Press ClampStorage
Bin Complete with Bin DischargeMotor
Size 10 HPPerformance
(depends on material) 60- 80KgBriquette
Dia. 50mmHopper
Opening: 55" x 55"The
most economical method for disposing of wood chips, saw dust, and sanding dustElectrical
Cabinet w/ Push-Button Controls
Year:
2005Our shop tested this and it makes briquettes as
de...
AMXmachinery
ASTILLADOR SCHUTTE
PARTE # 11802 - ASTILLADOR - SCHUTTE 1360IN GOOD CONDITIONS, AS-ISTop infeed is 21-1/2" x 23".Currently has 1" thick swinging hammers. Screen included (not installed) has 1/2" dia. round holes. Has been modified to a pneumatic discharge.Includes sub base, motor pedestal and permanent magnet installed in infeed chute.
AMXmachinery
PARTE: AMX-10072 - SIERRA ESCUADRADORA VERTICAL - HOLZ-HER 1265 SUPER CUT
PARTE:
AMX-10072 – SIERRA ESCUADRADORA VERTICAL – HOLZHER 1265 SUPER CUTUSADA – MUY BUENAS CONDICIONESMOTOR: 4 HP (3KW) 220V, 3 FASES, 60 HZNAVAJA INCISORAPROFUNDIDAD DE CORTE: 2 PULGADASDIAMETRO DE DISCO CORTADOR: 8-1/4 PULGADAS, 1-3/16” FLECHAMEDIDAS MESA: LARGO 510 CM X ALTO 225 CM X ANCHO 90 CM – PESO: 850
KG APROX.MEDIDAS ENVIO: LARGO 514 CM X ALTO 235 CM X ANCHO 150 CM – PESO:
1,000 KG APROX.EN TARIMA LISTA PARA ENVIO
MANUAL...
AMXmachinery
LIJA BANDA - LIJADORA BASTONES
LIJA BANDA PARA LIJADORA BASTONESGRANO 80, 100 Y 120SIL-R-FUS220-80 - BANDA X 86-080 127 MM X 1.86 MTSSIL-R-FUS220-100 - BANDA X 86-100 127 MM X 1.86 MTSSIL-R-FUS220-120 - BANDA X 86-120 127 MM X 1.86 MTS