ID: 250
Open
Description
PARTE # 12WG-UNIMAT 217 - MOLDURADORA - 5 CABEZALES
MOLDURADORA AUTOMATICA
5 CABEZALES
CARACTERISTICAS GENERALES:
KW (HP) rpm Tool cutting circle
1 - 7,5 (10) with Electronic Brake 6000 5“ – 5-11/16“
2 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“
3 - Joint Motor together with Right 6000 5“ – 7-7/8“
4 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“
5 - 7.5 (10) with Electronic Brake 6000 5“ – 7-7/8“
Tool arrangement BRLTB
Working width 3/4“ – 9“
Working height 5/16“ – 4-3/4“
(with tool cutting circle 5”)
Feed Speed-variable with inverter 20 – 100 feet per minute
DigiSet (double mechanical readouts) for left and top radial
adjustments. One readout is for the tool size and the other for the
finished wood dimension.
Five feed roller shafts in standard
One driven steel rollers in the machine table
One driven roller in the out-feed table
Axial setting range of feed roller opposite the left tool holder 1 3/8”.
Extended feed roller shaft opposite the left tool holder 6”.
Axial setting range of vertical spindle 3 -1/8 in.
Axial setting range of horizontal spindle 1 -3/4 in.
(1st bottom 3/16 in.)
All spindles diameter 1 - 1/2"
Mechanical readouts on top spindle chip-breaker and pressure shoe.
5 Additional set of spacing collars, clamping length 6-11/16”,
diameter 1-1/2"
Operating voltage- 3 phase, 460 Volt, 60 Cycles
according to US regulations
Straightening table, 6-1/2 ft
(incl. edge jointing fence)
Machine table and fences chromium-plated (excluding infeed table and special table plates)
Electric height adjustment of the feed
Central position of lubrication points at the front side of the machine
One interior light in the safety hood
The Illustrations in this offer can include special equipment, which do
not belong to the range of your offer.
The offer is made pursuant to our General Standard Terms and Conditions.
Safety and Noise Protection:
Electromagnetic interlocking of the safety hood (the hood may be
opened only after the spindles come to a complete stop,
(which is approximately 15 seconds with the “Smart” Spindle Brakes)
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery
DISCO AFILADOR PARA AFILADORA DE DISCOS
PARTE: 1SL-DC-BGR700-SD - DISCO DE AFILADO - PARA AFILADORA DE DISCOS DC-BGR-700Diámetro exterior: 4-3/4 pulgadaEspesor: ½ pulgadaDiámetro interior: 1-1/4 pulgada
AMXmachinery
TALADRO MULTIPLE 21
PARTE # 1VT-ALFA21CLASSIC - TALADRO MULTIPLE 21 BROCASNUEVO CON GARANTIACantidad de mandriles: 21Peso neto aproximado: 264 KgDistancia entre centro de mandriles: 32 mmDistancia entre el primer y último mandril: 640 mmProfundidad máxima de taladrado: 75 mmDimensiones de la mesa: 860 x 500 mmDimensiones máximas de la pieza: 800x3000 mmVelocidad de los mandriles: 2800 r.p.mFuerza del motor: 2.5 H.P.Presion de aire requrida: 6.8
AMXmachinery
Lámpara De Destellos - Solar
PARTE: 1SIL-DC-EQ-LAMS - Lámpara De Destellos - SolarLámpara de destellosDimensiones: 7 pulgadasFoto celdas de duración hasta 48 hrsAjustes de luzConstante e intermitente en dos velocidadesGiratoriaLámpara de destellos con Fotoceldas que tienen una duración aproximada de 48 horas. Es una herramienta muy versátil el uso sugerido puede ser; para Construcciones, Vialidad, Prevención entre otros.
AMXmachinery
PEGADORA CANTO CHAPA - ESPESOR 0.35 - 1.5 mm
PARTE # 3NN-VENEERPLUSG1 - PEGADORA DE CANTO LONGITUDINAL PARA CHAPASistema de pegamento integradoMachine SpecificationVeneer Strip Thickness (depending on veneer condition)：approx. 0.35 ~ 1.5 mmVeneer Strip Length：min. 350 mmVeneer Strip Width：min. 45 mmProduction Speed：up to 45 m/min.Electric Power：approx. 8.8 kwCompressed Air：5 barHeating Temperature：100 ~ 220 °CHeating Zone：1200 mmDimensions (L x W x H)：2200 x 2100 x 1600 mmNet Weight：approx. 1500 kgColor：RAL 8019 / R...