Identificador: 2572
Abierta
ID de articulo : # 2572 se ha agregado a su lista de deseos.
.PNG)
Descripción
TORNO 32 x 80'' PARTE: 2GM-GML-3280
Heavy Duty Precision Gap Bed Lathe 32” x 80” 4-1/8” bore, 15HP Motor.
- ISO 9001 certified
- Large spindle bore 4-1/8”
- 4-way rapid traverse on Longitudinal and cross ways
- All dual inch/metric dials.
- solid cast iron machine base
- Heavy Duty main motor 15 HP
- 12 spindle speeds from 25-1,600 rpm
- 54 kinds of inch threads and metric threads
- Threading and feeding rate change by levers
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- Tools box with leveling pads
Max. swing over bed | 32” |
Max. length of workpiece | 80” |
Max. swing over cross slide | 22-7/16” |
Max. Swing in gap | 40-1/2” |
Width of Bed | 16” |
Effective length in gap to spindle | 10” |
Effective length in gap to chuck jaws | 7” |
Spindle bore | 4-1/8” , D1-8 |
Taper of spindle center | MT#5 with1:20 reducing sleeve |
Spindle speeds | 25-1,600 rpm / 12 steps |
Longitudinal feeds | 0.0016-0.055 IPR, 60 kinds |
Cross feeds | 0.0008-0.027 IPR, 60 kinds |
Inch threads | 80-7/16”TPI, 54kinds |
Metric threads | 0.45-120 mm , 54 kinds |
Module threads | 0.25-60 mm, 46 kinds |
Diameter pitch threads | 60-0.25 DP , 42 kinds |
Max. travel of top slide | 9-1/8” |
Max. travel of cross slide | 16-1/2” |
Longitudinal rapid traverse | 18 ft / min. |
Cross rapid traverse | 8 ft / min. |
Diameter of tailstock quill | 3-1/2” |
Max. travel of tailstock quill | 6” |
Taper of tailstock quill center | M.T. # 5 |
Max. weight of workpiece | 2,000 LBS |
4-way tool post size | 1” x 1” |
Longitudinal leadscrew diameter / pitch | Diameter: 3” Pitch: 2 TPI |
Main Motor | 15 HP, 220V/40A / 440V/20A, 3 phase, prewired on 220V |
Rapid traverse motor | 1/3 HP, 220V/440V, 3 phase, prewired on 220V |
Coolant pump motor | 1/8 HP,220V/440V, 3 phase, prewired on 220V |
Machine weight, approx. | 9,350 LBS |
Overall dimensions, LxWxH | 146” x 48” x 67” |
- Free SINO DRO, installed
- Free Taper turning attachment, , installed
- 12” 3-jaw chuck with top reversible jaws
- 16” 4-jaw chuck
- 20” Face plate
- 10” drive plate
- ¾”-7-1/2” steady rest with roller jaws
- 1”-5” follow rest
- Removable gap
- 4-way tools post
- Chuck guard with safety shut off
- Foot brake
- Halogen Work light
- coolant system
- Full length rear splash
- (2) dead centers and (1) reducing sleeve
- Thread chasing dial
- Tool box and leveling pads
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
COLECTOR DE ASERRIN – DE BOLSAS – USO RUDO
PARTE: 2AC-TLM-162-10 - COLECTOR DE ASERRIN – DE BOLSAS – USO RUDO
NUEVO CON GARANTIA• 162-Bag High-Efficiency• Includes (162) 10’ 16 oz. polyester
snap-band bag filters rated for up to 300°F• Total Filter Area: 2,545 ft2• Air-to-Media Ratio @ 15,000 cfm:
5.89:1• Top Door, Clean-Side Filter
Access – no confined space required• Solid Welded Main Filter
Housing/Heavy Duty 7 and 10 gauge construction• Automatic Venturi-Assisted
Pulse-Jet Filter Cleaning System• Dwye...
AMXmachinery1
ENGANCHADORA CON CONTROLADOR NC
ENGANCHADORA CON CONTROLADOR NC PARTE: 2GM-HBB-1010NCISO 9001 certified Meet OSHA and CE safety standard48” NC table back gauge with fingers Max. 16 bends per program Upto 100 Program Storage Programmable Angle/ Angle Correct NC ram height control for open hemming Hardened fingers and table Germany Rexroth hydraulic system Yaskawa Servo motors and Drives Schneider electrical components All steel construction for maximum rigidityHydraulic logic...
AMXmachinery1
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS - AUTOMATICA
PARTE:
2CK-MX350M - ENCHAPADORA DE CANTOS - AUTOMATICANueva con GarantiaIs an entry level edgebander with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, the MX350M can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end tri...
AMXmachinery1
PARTE: 2CK-HR11P - REASERRADORA HORIZONTAL - 1 BANDA - 20 HP – 11.8” ANCHO X 4.92” ESPESOR
PARTE:
2CK-HR11P - REASERRADORA HORIZONTAL - 1 BANDA - 20 HP – 11.8” ANCHO X 4.92”
ESPESOR
NUEVA CON GARANTIACan produce a cut up to 11.8” wide and 4.92” thick. Capable of handling material from 11.8” wide to 9.8” thick. The powerful 20HP motor makes easy work of even hard to cut wood material. The thin kerf 1” wide blade achieves optimum cut quality while maximizing material yield. Equipped with motorized thickness adjustment with digital control for convenient blade he...