Identificador: 435
Abierta
ID de articulo : # 435 se ha agregado a su lista de deseos.
Descripción
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDO
HS-0410M, 4’x10Ga., 24” manual back gauge & 60" squering arm, 7.5 hp, 220V, 3 Ph
HS-0410E, 4’x10Ga., 24” SIKO power back gauge & 60" squering arm, 7.5 hp, 220V, 3
HS-0425M, 4’x1/4”, with 24” manual back gauge & 60" squering arm, 10 HP, 220V, 3
HS-0425E, 4’x1/4” with 24” SIKO power back gauge & 60" squering arm, 10 HP, 220V, 3
HS-0625M, 6’x1/4”, 10 HP, 220V, 3 PH, with 24" manual back gauge
HS-0625E, 6’x1/4”, 10 HP, 220V, 3 PH, with 24" SIKO power back gauge
HS-0808M, 8’x8Ga, 10 HP, 220V, 3 PH with 24” manual back gauge
HS-0808E, 8’x 8Ga, 10 HP, 220V, 3 PH with 24” SIKO power back gauge
HS-1010E, 10’x10Ga, 10 HP, 220V, 3 PH, with 36” SIKO power back gauge
HS-1025E, 10x1/4", 15 HP, 220V, 3 PH, with 36" SIKO power back gauge
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-913003 - LIJADORA DE 2 TAMBORES - 25” DE ANCHOSanding Capacity:Maximum Width (in): 25Minimum Length (in): 2-1/4, varies per applicationMaximum Thickness (in): 6Minimum Thickness (in): 1/32Dimensions HxWxD (in): 52 x 42 x 27Drum: 5 x 25 extruded aluminumDrum Speed: 1740 RPMDust Hood: Steel hood w/ two 4" vacuum ports, hinged at back, 1000 CFM recommendedBall bearings (1"): 4, sealed and permanently lubricatedConveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, infinitely vari...
AMXmachinery
MOLDURADORA 9" ANCHO
PARTE # 2TA-SM-236C - MOLDURADORA - 9" ANCHO, 6 CABEZALESPARTE # 2TA-SM-236U - MOLDURADORA - 9" ANCHO, 6 CABEZALESPARTE # 2TA-SM-237U - MOLDURADORA - 9" ANCHO, 7 CABEZALESNueva con garantiaFeatures:Hard chrome plated table for maximum wear resistance.Fully enclosed safety guard reduces noise and completely prevents chips splashing.Anti-impact plate for over-width and over-thickness protection.Oversized top and bottom rollers run synchronized, ensuring smooth feeding.FRP plastic steel safet...
AMXmachinery
EXTRACTOR DE CORAZONES
PARTE # M-MK-DM121 – Extractor de CorazonesExtracción de muestras en concreto hasta 200mm de profundidad.Diseño compacto para fácil manejo gran maniobrabilidad.ESPECIFICACIONES TECNICASPotencia: 1,050W/9.5AMáx. diá. de broca corona: 120mm (4-3/4”)Velocidad sin carga: 900rpmLongitud total: 575mm (22-5/8”)Peso neto: 9Kg (19.8lbs)Cable de conexión: 5m (16.4ft)
AMXmachinery
ENCHAPADORA
PARTE # 2TA-EB-7B - ENCHAPADORA DE CANTOS RECTOS Automatic feed station for: Pre-milling, Gluing, Pneumatic Guillotine, Double End trimming, Top & Bottom Rough Edge Trimming, Corner Rounding & Fine Top & Bottom Fine Edge trimming, Edge Scraping, Grooving, Edge PolishingThe feed of edging material, by ** strip ** or coil is automatic and synchronously with panel feed.Total enclosure covers with dust hood connector.Heavy and rigid construction to ensure necessary accuracy and stability.To guarant...