Identificador: 571
Abierta
ID de articulo : # 571 se ha agregado a su lista de deseos.
Descripción
PARTE: 2PG-W18 – HORNO PARA CERAMICA, VIDRIO, METALES – 95 LITROS
220V, 1 Fase, 4840 Watts, 22 Amps
Medidas interiores: 457 mm ancho x 457 mm fondo x 457 mm alto
Volumen interior: 95.43 litros
Max. Temperatura: 926 grados centígrados
Nuevo con garantía
Made of durable insulating firebrick. The digital controller saves time, makes casting more reliable, and gives consistently repeatable results. The 12-key Sentry controller has 3 built-in, easy-to-use programs. You can also enter your own programs for your exact needs. Included is an on-off toggle switch.
Has a heavy-gauge stainless steel case to resist corrosion. Heating elements are recessed to protect the element, yet the element is still accessible for easy replacement. This furnace also includes a top vent with ceramic plug for lost wax burnout. A spring door latch tightly seals the door while permitting easy opening with one hand for removal of hot flasks.
Designed for production
Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.
Specifications
Max. Temperature: 1700F - 926C
Amps: 22
Phase: 1
Watts: 4840
Nema: 6-30R
Breaker Size: 30
Circuit Copper Wire Size: 10 gauge
TUV tested to CSA and UL Standard 499 : N
CE: N
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
Control Type: Sentry Digital 12-key Non-Ceramic
Voltage: 220
Hertz: 60
Kiln Type: Front Loading Square
Sides: 4
Chamber Volume: 3.37 CU.FT. - 95.43 liters
Chamber Width: 18.00 IN - 457 mm
Chamber Depth: 18.00 IN - 457 mm
Chamber Height: 18.00 IN - 457 mm
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
Outer Size: 24.00W x 27.00D x 31.00H Inches (610W x 686D x 787H mm)
Ship Size: 34.00W x 34.00D x 43.00H Inches (864W x 864D x 1092H mm)
Ship Weight: 320.00 Lbs. - 145.15 Kg.
OPTIONS:
- Sentinel Controller, optional on new kilns
- Wax Tray and Grate
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENGOMADORA DE 54”
PARTE: 11753 - ENGOMADORA DE 54”
3 - ENGOMADORA DE 54”. ENGOMADORA MARCA IND. G.H.
ACCIONADA POR 2 RODILLOS DE 50” DE LARGO Y 7 ½” DE DIAMETRO, CON ELEVADOR
OPERADO CON CONTROL BARS, MOTOR IZQUIERDO CON PERILLA MANUAL Y ELECTRICA,
CONTROL DE MANO DERECHA, ENGOMADO EN MEDIDAS DE 0.8 MM A 2.5 PULGADAS DE GROSOR
CON UNA CAPACIDAD DE PROCESO DE 110 PIES POR MINUTO, MOTOR DE 5 HP Y
MOTORREDUCTOR DE 2.5 HP
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 19 LITROS
PARTE:
2PG-FUSION7 - HORNO PARA CERAMICA, VIDRIO, METALES – 19 LITROSNUEVO CON GARANTIAThe digital Sentry Xpress 3 key controller comes standard on all Fusion-series kilns. Control both heating and cooling with simple 3-key operation.The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon KilnsDesign programs with up to 8 segments (steps) in Ramp-Hold mode.Fire...
AMXmachinery
PART: AMX-10055-E - COIL FED TURN-BUTTON MACHINE - COBRA AHM-01
PART: AMX-10055-E - COIL FED TURN-BUTTON MACHINE - COBRA AHM-01USED – GOOD CONDITION - Sold as is - Where it isBrand: Craft Inc. from South Attleboro MassachusettsModel: COBRA AHM-01Serial: 079127V, CE36 reels included with approximate 6000 hangers each reelTotal Measures: 72” length x 26” wide x 62” heightPalletized for shipping, Will load into truck
AMXmachinery
PARTE: AMX-10122 - TRITURADORA - ORILLAS CHAPA, PAPEL, CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5TOB
PARTE: AMX-10122 - TRITURADORA - ORILLAS CHAPA, PAPEL,
CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5TOB
USADA - MUY BUENAS CONDICIONESPara papel, cartón corrugado y fibras pesadasMotor 2 HP, 208 - 230/460V, 60 HZ, 3 FASES - 1750 RPM - Marca BALDORMeiddas maquina: 25" ancho x 23" fondo x 29" alto - peso aprox. 161 kg (355 lbs)Medida maquina ya en tarima: 40" ancho x 33" fondo x 34" alto - peso aprox. 170 kg (370 lbs)===============================================================CATALOG...