Identificador: 59
Abierta
ID de articulo : # 235 se ha agregado a su lista de deseos.
Descripción
PARTE # 2TA-BP-100 - BRIQUETEADORA MOTOR 7.5 HP
- Use wood chips, saw dust and various biomass/ag residues to make the briquettes.
- Cost saving management of waste material by reducing the volume of waste to be handled.
- Effectively helps with compliance of local regulations mandating reduction of solid waste.
- Converts waste into a valuable heating source for colder climates
- Increases profitability by converting waste into a marketable product.
- Design allows for incorporation of multiple units in parallel for unlimited capacity.
| Specifications | BP-100 |
|---|---|
| Installed Power | 7.5 HP |
| Ferrule Dimensions | Ø1000 H 36.22" (920mm) |
| Max. Volume of Saw Dust in a Ferrule | 0.8m³ |
| Briquette Diam | 2" (50 mm) |
| Power | 7.5 HP |
| Pump | 26cm³ 1000g group 2 |
| Max. Working Pressure | 15MPa |
| Dimensions | 66" x 43" x 59" (1680 x 1100 x 1500 mm) |
| N. W. | 1499 LBS (680 kg) |
| G. W. | 1874 LBS (850 kg) |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
2AA-H550EII – SIERRA CINTA – CAPACIDAD 21.6”
PARTE: 2AA-H550EII – SIERRA CINTA –
CAPACIDAD 21.6” – AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 7.87"-18.90"
Rectangle
(W x H) 21.65" x 18.90"
Work
Load Capacity 4,409 lbs.
Saw
Blade Dimensions (L x T x W) 16' x 0.050" x 1.5"
Blade
Speed Inverter Blade Speed Control
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2 HP
Cutting
Fluid Pump Motor 1/2 HP
Voltage
Required*
AC220V±10%,
3 PH, 60 Hz
*All
Oth...
AMXmachinery
PARTE: 12498 - ARMADORA DE MARCOS - MITRE-MITE - VN4
PARTE: 12498 - ARMADORA DE MARCOS - MITRE-MITE - VN4
Usada en buenas
condiciones
MARCA:
AMO INTERNACIONAL
MODELO:
MITRE-MITE VN4
PEDAL
AUTOMÁTICO
Incluye
caja con 36,000 grapas V nails type 11 mm
AMXmachinery
CABEZALES PARA MOLDURADORA - NAVAJAS RECTAS
CABEZALES PARA MOLDURADORA - NAVAJAS RECTAS4 NAVAJAS – 12/20 GRADOSWeinig, Wadkin, SCMI, IIDA, Leadermac, Woodmizer, SilverLongitud de Corte, Diametro Flecha, Parte #50mm (1.96") 40mm MH-122-4-50D 1.5" MH-122-4-50D-1.560mm (2.36") 40mm MH-122-4-60D 1.5" MH-122-4-60D-1.580mm (3.15") 40mm MH-122-4-80D 1.5" MH-122-4-80D-1.5100mm (3.94") 40mm MH-122-4-100D ...
AMXmachinery
PARTE: 12486 - POLIPASTO - CAPACIDAD - 6 TONS
PARTE: 12486 - POLIPASTO - CAPACIDAD - 6 TONS
USADO BUENAS CONDICIONES