Identificador: 94
Abierta
Descripción
PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138
All Form 8' capacity
- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz
- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)
- Standard Features:
- Overhead clamp and vacuum system
- Forming length capacity 100"
- 1 ½” maximum forming radius. (3” thick material)
- Foot print 4' wide X 11' long
- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit
- Integrated timer. Individual control on all air components.
- Working height 36"
- Crated weight 1855 LBS.
- Shipping dimensions 143” long X 46” wide X 57” high
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
REFACCIONES PLANTAS ELECRICAS POWEREN
REFACCIONES PLANTAS ELECRICAS POWEREN- AVR- ROTOR- ESTATOR- PORTA CARBONES- BATERIAS- MARCHAS- TANQUES- SOPORTES- PISTONES- ANILLOS- BIELAS- VALVULAS- RETRACTIL- KIT DE AFINACION- FILTRO DE AIRE- CARBURADOR
AMXmachinery
REASERRADORA 2 SIERRAS 16"
PARTE # 2TA-BS-1616HR-TN - REASERRADORA HORIZONTAL - 2 SIERRASNUEVA CON GARANTIASpecificationsBS-1212HR-TNBS-1616HR-TNMax. Cutting Capacity12" x 12"16" x 16"Distance between Blade to Conveyor1/4" ~ 12"Saw Wheel Diameter28" x 2Saw Blade Length (Width)201" (2")201" (2" ~ 3")Saw Blade Speed6000 FPMFeed Conveyor Width12"16"Feed Speed (Variable)0 ~ 90 FPMMain Motor (Each Head)20 HP x 230 HP x 2Saw Blade Lift Motor1/2 HPFeed Conveyor Motor3 HPDust Hood4" x 6N. W.7200 LBS8600 LBSMachine was built with ...
AMXmachinery
PARTE: 12474 - PINCH ROLLER - EVANS
PARTE: 12474 - PINCH
ROLLER - EVANS
USADA - BUENAS CONDICIONES
Safety Gates on In-Feed and Out-Feed
Solid Top and Bottom Rollers
Feed Rate: 50’ FPM
Maximum Width: 62”
Maximum Thickness: 2”
Thickness adjustable by spacers
Work Height: 30-1/2”
Drive Motor: 1/2 HP
Electrical: 120 V, 1 PH,
60 Hz
Air Requirement: 100 PSI
AMXmachinery
ENGOMADORA DE 54”
PARTE: 11753 - ENGOMADORA DE 54”
3 - ENGOMADORA DE 54”. ENGOMADORA MARCA IND. G.H.
ACCIONADA POR 2 RODILLOS DE 50” DE LARGO Y 7 ½” DE DIAMETRO, CON ELEVADOR
OPERADO CON CONTROL BARS, MOTOR IZQUIERDO CON PERILLA MANUAL Y ELECTRICA,
CONTROL DE MANO DERECHA, ENGOMADO EN MEDIDAS DE 0.8 MM A 2.5 PULGADAS DE GROSOR
CON UNA CAPACIDAD DE PROCESO DE 110 PIES POR MINUTO, MOTOR DE 5 HP Y
MOTORREDUCTOR DE 2.5 HP