ID: 1775
Open
Description
PARTE: 2CK-P30
Is the ideal solution for customers looking for the precision and convenience of a sliding table saw but have limited floor space and smaller cutting requirements. The machine has a precision sliding table which runs on ball bearings and hardened steel guide strips. It is equipped with individual motors for the main saw blade (5 HP) and scoring blade (¾ HP). The blade height and tilt is manually adjusted by means of individual handwheels. The angle of the blade is displayed by a linear scale for added operator convenience. The rip fence runs on a round hardened rail and is manually adjusted up to 51”. Equipped with a crosscut miter fence and (2) flip stops.
- Precision anodized aluminum sliding table with ball bearing guide system for smooth table movement
- Powerful 5 HP main motor with ¾ HP scoring motor
- Heavy duty cast-iron rip fence with 51” cutting capacity
- Aluminum crosscut miter fence with (2) flip stops
- Manual rise/fall the main saw blade
- Manual tilting of the saw blades with angle indicator conveniently located by adjustment handwheel
- Overarm blade guard with build in dust port
- Solid cast iron main table which is ground and polished
- Heavy-duty outrigger for strong support of workpiece during cutting operations
KEY ADVANTAGES
- Solid rip fence with manual fine adjustment and locking lever
- Easy to access external scoring adjustment
- Extension table at side and back of main table
- Optional Equipment Included:
- Eccentric hold down clamp
- CE Overarm Guard with Dust Port
- Wedge for Solid Wood Ripping
|
|
|
Metric |
|
Sliding table dimension |
63″ x 12.4″ |
1600 x 315mm |
|
Cast Iron table |
21 ½” x 35 ¼” |
548x896mm |
|
Extension table (rear) |
18″ x 17 ½” |
470x896mm |
|
Extension table (front) |
12 ½” x 32 ½” |
320x830mm |
|
Table size |
39 ½” x 68″ |
1018x1726mm |
|
Main saw blade (Max.) |
12″ |
305mm |
|
Main saw bore |
30mm |
|
|
Max. cutting height at 90° (355mm) |
3.54” |
90mm |
|
Max. cutting height at 45° (355mm) |
2.48” |
63mm |
|
Main motor power |
5 HP |
|
|
Main blade speed |
4000 RPM |
|
|
Scoring saw blade |
120mm |
|
|
Scoring saw blade bore |
20mm |
|
|
Scoring blade motor power(optional) |
3/4 HP |
|
|
Scoring blade speed |
8000 RPM |
|
|
Cutting width – ripping |
51” |
1300mm |
|
Cutting width adjustment |
Manual |
|
|
Crosscutting width (Maximum) |
134.6” |
3420mm |
|
Main saw blade tilting adjustment |
Manual (0°~ 45°) |
|
|
Main saw height adjustment |
Manual |
|
|
Scoring saw height adjustment |
Manual |
|
|
Saw guard |
CE Guard Included |
|
|
Dust collection ports |
(1) 4” / (1) 2.3” |
(1) 100mm / (1) 60mm |
|
Machine weight |
984 lbs |
447 kgs |
|
Electrics |
230/1/60 = 34.9 Full Load Amps |
|
|
230/3/60 = 18.4 Full Load Amps |
||
|
575/3/60 = 7.4 Full Load Amps |
||
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
SIERRA MULTIPLE - DIAMETRO DISCOS 12”
PARTE: 2NT-NT-MRS12N - SIERRA MULTIPLE - DIAMETRO DISCOS
12”The NT MRS12N Multiple Rip Saw features a cast iron frame that houses a variable speed dip chain for premium rip capability. Often referred to as gang rip saws, this machine is fitted with closer fitting upper hold down rollers the MRS12N boasts the shortest part feeding on a multiple rip saw. The MRS12N uses 12″ diameter rip saw blades and can be equipped with power raise and lower, invertor speed control and non marking urethane ...
AMXmachinery1
ASTILLADORA - 26 PULGADAS
PARTE: 2TA-WG-2630 - ASTILLADORA - 26 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, plastic, rubber, corn cobs, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage.Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of ...
AMXmachinery1
LIJADORA DE BANDA VERTICAL HEAVY DUTY - 10 HP
PARTE: 2CK-OES512DIs the ideal edge sander for demanding applications for production use. Equipped with a 12” high oscillating sanding belt, it is ideal for sanding drawer boxes, doors, furniture components and more. The OES512D is also equipped with dual front and rear tables which are adjustable up & down and can be tilted to 45 degrees, allowing for a wide range of applications and full utilization of the sanding belt. The dual tables also allow for two operators to be working on the mach...
AMXmachinery1
SIERRA DOBLE - 45 GRADOS - 20 PULGADAS
PARTE: 2CK-PCM508Is a precision pneumatic saw designed for cutting miters up to 60o in either direction. The saw is automatically cycled pneumatically and activated by a foot switch to allow for fast positioning of the workpiece. Capable of production cutting with up to 40 cuts per minute. The cutting speed is adjustable to ensure the optimum finish result on your workpiece no matter the species or size. The rotary table runs on ball bearings to ensure effortless rotation of the blade ...