Identificador: 1795
Abierta
Descripción
PARTE: 2CK-MRS155
FEATURES
- Extra Robust 100 HP motor
- Great Cutting Thickness of 155mm (6.1″)
- Continuous duty 100 HP arbor motor allows deep cutting speeds of thick lumber
- MRS-155 has a massive cast iron base, composing the majority of total machine weight of 2700kg. This design provides incredible absorption characteristics under deep cutting, especially while performing thick lumber ripping with a multi-blade set up
- Precision chain and rails (dip chain) system facilitates accurate cutting operations
- Link Chain Feed made of special cast iron, high-grade steel connecting pins are heat-treated and precision ground
- 3 anti-kickback fingers. 2 top and 1 bottom row
- Digitally controlled lubricator for feed chain ensures a permanent oil film between the chain and the guide rails. If there is insufficient oil in the tank, the warning lamp lights up and the feed chain stops running automatically
- Electrical Amperage Display protects overload of the saw motor by slowing the link chain down automatically
|
Max. cutting thickness |
155mm |
|
Max. cutting width |
350mm |
|
Distance of fixed inside blade to column |
380mm |
|
Min. working length |
700mm |
|
Max. sawblade diameter |
450mm (18″) |
|
Min. sawblade diameter |
355mm (14″) |
|
Sawblade bore |
70mm |
|
Saw arbor diameter |
55mm |
|
Saw
arbor speed |
2500 rpm |
|
Saw
arbor speed |
3000 rpm |
|
Saw arbor motor |
75 HP |
|
Feed motor |
3 HP |
|
Variable feed speed |
2.5-24 m/min |
|
Powered raise and lower of roller group |
1 HP |
|
Dust hood diameter |
200mm |
|
Table height (pass line) |
745mm |
|
Table area (L x W) |
1840 x 790mm |
|
Overal
dimensions |
23040x1720x1600mm |
|
Net weight |
2700 kgs |
|
Gross weight |
3000 kgs |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
TALADRO MULTIPLE - 21 TALADROS PARA CONSTRUCCION
PARTE: 2CK-HS21TIs a versatile construction drilling machine which is capable of line boring, end drilling, & construction drilling functions. The HS21T has a robust fabricated steel construction with precision machined cast iron table. The boring head is cycled pneumatically and runs on precision linear guide rails for smooth drilling cycles. A 2 ½ HP motor powers the boring head with 21 gear driven drill bits and operates at 2800 RPM. Each spindle is equipped with a quick-change chuck t...
AMXmachinery1
SIERRA CINTA - 24 PULGADAS
PARTE 2CK-HB600RIncorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can handle any job. With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements. The upper and lower blade guides provide maximum stability no matter the blade you are cutting with. This bandsaw delivers high accuracy for maximum production along with a simple design that assures minimum mai...
AMXmachinery1
TALADRO MULTIPLE - 21 TALADROS
PARTE: 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precision boring head has interlocking steel ...
AMXmachinery1
DOBLADORA DE METAL 5' X 3/16''
DOBLADORA DE METAL 5' X 3/16'' PARTE: 2GM-05316EThis machine has a 4HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is...