Identificador: 1679
Abierta
ID de articulo : # 1679 se ha agregado a su lista de deseos.
.jpg)
Descripción
PARTE: 2CK-TPS-SH - SIERRA DE PANELES AUTOMATICA
Production panel sizing solution for the small to mid-sized manufacturer. The industrial machine design combined with user friendly PC control interface ensure accurately dimensions sheet components with a chip free finish. Available in 8’, 10’, 12’ with front loading. The powerful 18HP saw motor and carriage runs on two round hardened guide rails on (8) copper wheels. The saw carriage cutting speed is variably adjusted according to your cutting height requirement. A double side aligner ensures panels are squarely cut during crosscutting operations. The onboard PC control allows the operator to program right at the machine or import a cutting list which can be run though the standard optimization software.
- Available in 8’, 10’, or 12’ models
- Front loading operation
- User friendly PC control on screen pattern editing and built-in optimization software
- Powerful 18HP saw motor with variable cutting speed and quick return speed
- Saw carriage runs on hardened round guides and (8) copper wheels
- Programmable pusher beam with reliable rack and pinion adjustment
- Equipped with 7/8/9 pneumatic grippers
- Double side aligner for accurate crosscutting operations
- 4” maximum cutting height for multiple sheet operation
- (3) or (4) air flotation tables to assist in loading of panels
|
MODEL |
TPS-10SH |
TPS-12SH |
TPS-8SH |
|||
|
CAPACITY
|
Max. cutting length |
2600 |
3200 |
3800 mm |
||
|
Max. cutting width (depth) |
2600mm / 3200 mm / 3800mm |
|||||
|
Max. cutting height |
100 mm |
|||||
|
Max. gripper opening |
110 mm |
|||||
|
Max. saw blade projection |
105 mm |
|||||
|
MAIN SAWBLADE
|
Main sawblade motor |
18HP (11.2KW) |
||||
|
Main sawblade diameter |
Ø405 mm |
|||||
|
Spindle diameter |
Ø1” (25.4mm) |
|||||
|
Main sawblade speed |
4,400 R.P.M. |
|||||
|
SCORING SAWBLADE
|
Scoring sawblade diameter |
Ø180 mm |
||||
|
Spindle diameter |
Ø1” (25.4mm) |
|||||
|
Scoring sawblade speed |
7,000 R.P.M. |
|||||
|
SAW CARRIAGE
|
Saw carriage drive motor |
2HP with inverter (1.5KW) |
||||
|
Forward Speed (adjustable) |
1~45 M/min |
|||||
|
Return Speed |
70 M/min |
|||||
|
PUSHER
|
Pusher system drive motor |
1KW |
||||
|
Pusher system pull speed |
1~70 M/min |
|||||
|
Pusher system push speed |
1~60 M/min |
|||||
|
OTHERS
|
High pressure blower motor |
3HP (2.2KW) |
||||
|
Side aligner motor |
90W |
|||||
|
Working air pressure |
5~6 kg/cm2 |
|||||
|
Table height from floor |
850 mm |
|||||
|
Grippers |
7 units |
8 units |
9 units |
|||
|
Floating table |
3 units |
3 units |
4 units |
|||
|
Voltage |
220V / 440V / 575V |
|||||
|
Hertz |
60HZ |
|||||
|
Net weight |
4200kg |
4500 kg |
4700 kg |
|||
|
Gross weight |
4700kg |
5100 kg |
5300 kg |
|||
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA OPTIMIZADORA - AUTOMATICA
PARTE: 2CK-CFS100 - SIERRA OPTIMIZADORA - AUTOMATICAIs the perfect upgrade from your manual cutoff saw with 3 to 5 times higher production output. It is designed to scan for defects in your material which are indicated by a florescent crayon mark. The saw will cut on the crayon mark allowing for fast defect removal. Equipped with several cutting modes like fixed, sequential, defect cutting modes the operator can select the program most suited to their needs. The powerful 10HP motor and 1...
AMXmachinery1
SIERRA MULTIPLE
PARTE: 2CK-MRS12FEATURESThe Frame is Cast Iron, all the main parts are enclosed, ensuring protection and perfect stabilityStraight line caterpillar feeding with heavy guided chain with rubber inserts. Chain blocks are special cast iron with heat treated & precision ground pinsNickel chrome steel Saw Arbor with 70 mm OD – dble. keyed quick removal sleeve3 sets of Anti-Kickback Fingers 2 top, 1 bottomPowered Rise & Fall to the pressure rollersNew style round Fence Bar support with quick shift lo...
AMXmachinery1
TALADRO MULTIPLE EN LINEA
TALADRO MULTIPLE EN LINEA 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precision ...
AMXmachinery1
PARTE: 4NE-VALIENTE - CENTRO DE MAQUINADO CNC - VALIENTE
PARTE: 4NE-VALIENTE - CENTRO DE MAQUINADO CNC - VALIENTEControl Unit TPA (İtalian)• Spindle: HITECO HSK F63 11KW ATC• Vacuum Pump: BECKER 250M3• Working Capacity: 2100mm*2800mm (2100mm*3660mm Option)• Remote Control: YES• Automatic Self Lubrication System: YES ( ILC - Italian )• Under Bridge with 14 tool capacity magazine• 14 Pieces Toolholder• Vacuum Zone: 6 zone for 2128 / 8 zone for 2136• Boring Unit FAM 9 Vertical ( Italian ) Optional• Automatic Unloading and Cleaning Sy...