Identificador: 95
Abierta
ID de articulo : # 95 se ha agregado a su lista de deseos.
Descripción
PARTE # 2EV-0190 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0190
Para hacer dobles para Back Splash
- 110V, 1 phase, 15 amps
- 220V, 1 phase, 8 amps
- Air: 80 PSI
- 12' maximum capacity (3660 mm)
- Back Splash Height: Minimum 1" (25 mm), Maximum 34" (860 mm)
- Possible coving radios: 1/8" (3 mm) , 3/16" (5 mm), 3/8" (10 mm)
- Crated weight 1800 LBS.
- Shipping dimensions 182” long X 34” wide X 50” high
- Bends inside cove bends for back splashes. The 0190 is available with either a 1/8", 3/16" or 3/8" radius coving rod heater that is thermostatically controlled. Other options available include a timer and pneumatic bending clamps.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ASTILLADORA – 30 HP, 3 FASES, 460V – ABERTURA 24” X 41” – WEIMA
PARTE: 12098 – ASTILLADORA – 30 HP, 3 FASES, 460V –
ABERTURA 24” X 41” – WEIMA
En excelentes condiciones
Limpiada y checada
Solo 725 horas
Vertical Feed
30 HP rotor motor
1.2 HP
hydraulic unit
24"
x 41" hopper opening
.8 cubic
yard hopper
10"
diameter rotor with 28 index-able knives
Rotor
speed: 100 RPM
Output:
400 to 1000 lbs/hr (depending on screen size and material)
1-3/8"
diameter screen size
Separate
electrical panel
160 mm
dia...
AMXmachinery
SIERRA TRIMMER – 120" LARGO - MULTISIERRA
PARTE: 2FA-MET20 – SIERRA TRIMMER –
120" LARGO - MULTISIERRA
NUEVA CON GARANTIA
Standard
Features
Low
Profile
Heavy
Duty Framing
Flat
Waste & Catch Conveyors
Machine
Specs
Dimensions
Length:
13′
Width:
72"
Height:
59"
Infeed
Height: 41"
Width
Including Conveyor: 100"
Power
Blade
Motor: 5 HP 208/230/480/3/60 TEFC
lnfeed
Motor: 1-1/2 HP 208/230/480/3/60 TEFC
Waste
Conveyor Motor: 1/2 HP 208/230/480/3/60 TEFC
Take
A...
AMXmachinery
T-EDGE APPLICATOR
PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050 T-Edge Applicator- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.- Standard Features:- Hammer ½ hp motor- Pneumatic corner notching- Electric cutoff ½ hp motor- 3" Dim. Saw blade 8,000 RPM- 80 PSI Required- Crated weight 600 LBS.- Shipping dimensions 53” long X 40” wide X 50” high
AMXmachinery
TORNO COPIADOR – NAVAJA TRASERA – LOBO
PARTE # 11623 – TORNO COPIADOR – NAVAJA TRASERA – LOBO En buenas condiciones de opracionProduccion 4-7 piezas por minutoMotor 7.5 HP, 220/440V, 3 fases, 60 cyLOBO CP-168A Hydraulic Copy Lathe with hopper feed with automatic chucking, square or round stock can be hopper feed.This unit is designed to produce (4 - 7) pieces a minute.Equipped with 7.5 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change and 3 HP hydraulic motor.Features:Designed for the fast, effici...