Identificador: 1425
Abierta
Descripción
PARTE: 1SIL-DC-EQ-CIN-PREC - Cinta “PRECAUCIÓN”
Cinta “PRECAUCIÓN” En polietileno de 7.5cm x 300m y 0.3mm
Las cintas con leyendas como peligro, precaución entre otras son de gran utilidad para demarcar zonas en donde lo necesites.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA CINT CNC VENETA SHUTTLE
PARTE # 10177 - SIERRA CINTA CNC - VENETA SHUTTLEEN MUY BUENAS CONDICIONES DE OPERACIONMARCA: VENETAMODELO: SHUTTLEMANUFACTURA: 200415 KW, 400V, 50-60 HZVERTICAL WORKING STROKE X : 3500MMVERTICAL WORKING STROKE Y : 800MMSTANDARD CUTTING LENGTH: 1500MMCUTTING HEIGHT: 0-150MMCUTTING ANGLE: /- 90 DEGREEDIMENSIONES TOTALES: 4600MM X 3500MM X 2500MMVIDEO DISPONIBLE DE LA MAQUINA TRABAJANDO
AMXmachinery
LIJADORA DE DISCO Y BANDA
PARTE:
2AR-97181 – LIJADORA DE DISCO Y BANDANUEVA EN SU CAJA ORIGINALPowerful
3.5 amp motorCast
aluminum table tilts to 60° for use with belt or disc6
in. disc for fast stock removalMiter
gauge for sanding angles on workpieceAdjustable
belt sands inside and outside curvesReinforced steel motor housingAC
Volts: 120Accessories
Included: Miter gauge, sanding belt and sanding discAmperage
(amps): 3.5Belt
width”: 4 in.Diameter
disk: 6 in.Horsepower
(hp): 3/4Speed
(max): 1819 RPM (di...
AMXmachinery
SIERRA ESCUADRADORA 3200 MM
PARTE: 2MK- BMS-3200-IR – SIERRA ESCUADRADORA – 3200 MM – 5 HP, 220V, 3 FASES – DISCO 12”Tailor made to provide high quality precise cuts in diverse angles with a max cut depth of 4 inches (100 mm) at 90º. It includes a 5 HP motor, cutting guides, miter guide, blade guard. The noise level of this equipment is 76.5 dB (the machine turned on only) up to 110 dB (with the machine on and the exhaust system on. The noise will vary in accordance with the location the machine is in and the ma...
AMXmachinery
T-EDGE APPLICATOR
PARTE # 2EV-1050 - T-EDGE APPLICATOR - EVANS 1050 T-Edge Applicator- 220 volt, 1 Ph., 60 Hz. Or 220 Volt 1 Ph., 50 Hz.- Standard Features:- Hammer ½ hp motor- Pneumatic corner notching- Electric cutoff ½ hp motor- 3" Dim. Saw blade 8,000 RPM- 80 PSI Required- Crated weight 600 LBS.- Shipping dimensions 53” long X 40” wide X 50” high